Overview
The G2 Axle and Gear 95-2013-003 is a Ford 8.8 inch rear passenger side axle shaft with 31 splines, made for 1987–1996 Ford F-150 and Bronco models. It is forged from alloy steel and heat treated beyond OEM specifications for high torque use, and it takes 1/2 inch press fit wheel studs that are sold separately.
The 95-2013-003 is the passenger side shaft for the Ford 8.8 inch rear axle, with 31 splines and 1/2 inch press fit studs. Wheel studs are not included. The Bronco and F-150 are covered for 1987–1996. E-150 vans need a separate fit check for your vehicle before ordering. Bronco and F-150 owners use the same part number. Buyers replacing both rear shafts also need the driver side part.
Key features
- Passenger side rear axle shaft for the Ford 8.8 inch axle
- 31 splines
- 1/2 inch press fit wheel studs
- Forged from high grade alloy steel.
- Heat treated to exceed OEM specifications.
Stud fitment and axle matching
The Ford 8.8 inch axle is common in F-150s and Broncos from this era, and its shaft and differential gears need to match in spline count. Before the shaft is installed, count the splines on the gear inside the housing and confirm they are the same. A mismatch will not seat properly.
Press fit studs must suit the shaft flange. Check the stud diameter on the old stud and confirm the shaft takes it before pressing in new studs. Keep a stud press on hand so the stud goes in straight.
Inspect the old shaft for twisted splines, cracked flanges and grease leaks before deciding whether to reuse the other side. Bronco and F-150 owners who replace both shafts in one job avoid uneven wear on the axle.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2013-003 |
| UPC | 631410105728 |
| Axle manufacturer | Ford |
| Shaft location | Passenger Side |
| Axle position | Rear |
| Axle type | Ford 8.8 Inches |
| Position | Rear |
| Spline count | 31 Splines |
| Wheel stud size | 1/2 inch press fit |
| Material | High grade alloy steel, forged |
| Applications noted | 1987-1996 F-150 / Bronco / E-150 |
Vehicle fitment
It fits the Ford Bronco and F-150 for 1987–1996.
- 1987–1996 Ford Bronco (Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite, XLT Sport)
- 1987–1996 Ford F-150 (Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat)
The Bronco and F-150 are covered for 1987–1996, and other Ford trucks fall outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
One rear axle shaft.
Not included: wheel studs.







