Overview
The G2 Axle and Gear 95-2011-001 is a small bearing Ford 9 inch rear axle shaft with 28 splines for the 1966–1975 Ford Bronco. G2 says its axle shafts are made for high torque applications and to correct common faults in factory shafts, forged from high grade alloy steel and heat treated to exceed OEM specifications. Wheel studs are not included with this shaft.
This is a small bearing Ford 9 inch rear axle shaft. Confirm which side you need, driver or passenger, before ordering. Wheel studs are not part of the shaft, and 95-2011-002 is the small bearing driver side shaft with the same 28 spline count.
Key features
- Rear axle shaft for the Ford 9 inch axle
- 28 splines
- Small bearing design
- Forged from high grade alloy steel.
- Heat treated to exceed OEM specifications.
Ford 9 inch shaft notes
A Ford 9 inch axle shaft transfers torque from the differential to the wheel hub, and its spline count must match the gear side and axle. Small bearing shafts ride in a different bearing size than big bearing shafts, so they are not interchangeable even when the splines look alike. Confirm the bearing type on the old shaft before ordering.
Inspect the axle bearing bores, retainers and seals whenever a shaft is replaced. A worn bore or damaged seal lets grease escape and can lead to wheel bearing failure. Use fresh bearing grease on the new bearings and check that the wheel studs and lug nuts are sound before the wheel goes on.
- Confirm bearing size before fitting
- Check spline count against the gear side
- Inspect the seal and retainer
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2011-001 |
| UPC | 631410105803 |
| Axle manufacturer | Ford |
| Shaft location | Passenger Side |
| Axle position | Rear |
| Axle type | Ford 9 Inches |
| Position | Rear |
| Spline count | 28 Splines |
| Bearing | Small bearing |
| Material | High grade alloy steel, forged |
| Applications noted | 1966-1975 Ford Bronco |
Vehicle fitment
Fits the 1966–1972 and 1974–1975 Ford Bronco (Base, Custom, Northland, Ranger) and the 1975 Ford Bronco Sport. 1973 is not covered. Check your Bronco’s year, model and trim against this list before buying.
- 1966–1972, 1974–1975 Ford Bronco (Base, Custom, Northland, Ranger)
- 1975 Ford Bronco Sport
1973 is missing from the list, which runs 1966–1972 and 1974–1975 plus the 1975 Bronco Sport. Later Broncos and other Ford trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear axle shaft.
Not included: wheel studs.







