Overview
The G2 Axle and Gear 97-2081-001 is a chromoly Birfield CV style outer axle shaft for the front axle of 1986–1995 Suzuki Samurai models.
Samurai owners with a broken outer stub shaft can use this one part on either side of the truck. It has 25 splines on the joint end and fits the Suzuki 6.875 inch axle. G2 says its shafts are heat treated beyond OEM specifications and built for the extra load of larger tires. The application line reads: for use in 86-95 Suzuki Samurai.
The Samurai front axle uses an outer stub shaft at each wheel, and this one has 25 splines at the joint end. Because the same G2 part number covers the driver or passenger side, there is no left or right to get wrong, which simplifies the job for owners replacing both. The Suzuki axle size listed is 6.875 inches. A Birfield style joint is a constant velocity design that lets the front wheels steer and take drive torque at the same time, which is why the shaft end has to match the joint. Chromoly is the material G2 lists, with G2 reporting that its shafts are forged and heat treated.
Key features
- Chromoly outer stub axle shaft, Birfield CV style
- 25 splines on the joint end
- One part number for driver or passenger side
- Made for the Suzuki 6.875 inch axle
- Direct fit for the front axle
- Covers the full 1986–1995 Samurai range
Samurai front axle upkeep
The Samurai front axle uses an outer stub shaft at each wheel, and the stub is where the Birfield joint meets the hub. The joint lets the wheel steer and take drive at the same time, so a torn boot or a worn joint shows up as a clunk when shifting from drive to reverse or as vibration under power.
Large tires and off-road use put more load on the stubs and joints, so keep the boots in good condition and the joints greased. Check the hub bearings at the same time, since play at the hub can make the stub feel loose even when the shaft is sound. Replace both sides when one fails, since the other side is worn to a similar point.
- Check boots for tears before each trail trip
- Grease the joint when the boot is replaced
- Look for play at the hub
- Inspect both sides after a stub failure
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2081-001 |
| UPC | 631410107463 |
| Part type | Outer axle shaft (outer stub), Birfield CV style |
| Material | Chromoly |
| Axle location | Front |
| Side | Driver or passenger |
| Axle type | Suzuki 6.875 inches |
| Spline count | 25 splines on the joint end |
Vehicle fitment
It fits the 1986–1995 Suzuki Samurai, and the application matches those model years.
Other Suzuki models and years outside 1986–1995 are not covered by this shaft.
Installation notes
Because one shaft serves both sides, a full outer shaft replacement needs two. Compare the joint end splines with your CV before installing.







