Overview
The G2 Axle and Gear 95-2016-001 is a replacement rear axle shaft for GM 10 bolt axles with an 8.2 inch axle type. It fits the driver or passenger side with 28 splines.
G2 forges this shaft from high grade alloy steel and heat treats it to exceed OEM specifications. The stated purpose is high torque use and larger tires, supported by rolled splines and better materials.
Key features
- Forged from high grade alloy steel
- Heat treated to exceed OEM specifications
- Rolled splines for high torque applications
- Big Spline options named for larger tires
- 28 splines on the rear axle shaft
Upgrading for larger tires
Larger tires increase the leverage a rear axle shaft sees, particularly during hard launches and low-speed crawling. The shaft is the link between the differential and the wheel, so any slack or twist at the splines is felt quickly. Many owners who run bigger tires also change gearing or add stronger axle components, which can shift the load onto the shaft.
When planning a change, look at the whole rear end rather than one part. The axle bearing, the seal and the brake hardware all work together with the shaft. Inspect them while the shaft is out, and keep the spline count and axle type on hand so the new part matches the housing.
- Check the spline ends for twisting or cracks
- Inspect the bearing and seal during removal
- Match the axle type before ordering
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2016-001 |
| UPC | 631410106169 |
| Axle type | GM 10 bolt, 8.2 inch |
| Axle location | Rear |
| Shaft location | Driver or passenger |
| Spline count | 28 splines |
| Material | High grade alloy steel |
Vehicle fitment
This shaft is Universal Fit with no make, model, year or chassis code. Match the 10 bolt axle type, 8.2 inch size and 28 spline count to your axle housing.
Other GM axle types and sizes fall outside the 8.2 inch description. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the spline count and the 8.2 inch axle type on your current shaft, since the 28 spline count is the figure to match. Raise and support the vehicle on stands before you work underneath it.
What’s included
This is one replacement shaft for the driver or passenger side. Check the fasteners, bearings and seals against your installation before starting.









