Overview
The G2 Axle and Gear 2-2046-373-37 is a 3.73 ratio ring and pinion for the Ford 10.5 Inch axle with a 37 spline count. The pinion turns 3.73 times for each ring gear revolution, a middle-range ratio that adds low-speed pulling force.
This Performance set is designed for oversized tires and high-performance engines, using current materials and manufacturing methods. The Ford 10.5 Inch axle type is the match to confirm, along with the axle housing and spline count on your vehicle before ordering.
Key features
- 3.73 gear ratio for the Ford 10.5 Inch axle
- 37 spline
- Ring gear and pinion supplied as one set
- Designed for oversized tires and high-performance engines.
- Made with current technology and materials.
Before you buy
A ring and pinion set is the pair of gears that sets the final drive ratio inside the axle housing. The pinion meshes with the ring gear, so the two parts are sold and replaced as a matched pair. Before buying, measure or confirm the housing type, the ring gear size and the spline count on the axle shafts. Shafts with the wrong spline count will not seat in the carrier, so this check comes first.
Expect the new gears to change engine speed at a given road speed. Larger tires already lower effective gearing, which is one reason a numerically high set is often chosen to recover some of that loss. Plan for matching parts, since pinion seals, crush sleeves, bearings and shims are commonly replaced when the gears are rebuilt.
- Axle housing type and ring gear size
- Spline count on both axle shafts
- Pinion seal and crush sleeve condition
- Carrier bearings and shim kit
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-373-37 |
| UPC | 631410142136 |
| Axle type | Ford 10.5 Inches |
| Spline count | 37 (per title) |
| Gear ratio | 3.73 |
| Axle manufacturer | Ford |
Vehicle fitment
It is made for the Ford 10.5 Inch axle with a 37 spline count. Confirm the axle type and spline count on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and carrier preload need precise setup, so a gear shop with setup tools is the usual installer. A break-in run is recommended before loaded use.
What’s included
One 3.73 ring and pinion set for the Ford 10.5 Inch axle, part number 2-2046-373-37.
Not included: Carrier bearings, shims and installation hardware are not part of this set.









