Overview
The 2-2055-529 is a 5.29 ratio ring and pinion for the front Toyota 7.5 Inch axle in the Toyota Tacoma line. The pinion turns 5.29 times for each ring gear revolution, a numerically high ratio that multiplies torque at the wheels and favors low-speed pulling.
This front reverse set is built for oversized tires and high-performance engines, with current materials and manufacturing methods. Confirm the front 7.5 inch axle and the reverse design match your truck before ordering.
Key features
- 5.29 gear ratio for the front Toyota 7.5 Inch axle
- Front axle location
- Front reverse design.
- Designed for oversized tires and high-performance engines.
- Made with current technology and materials.
Front axle considerations
Front axles carry steering and drive loads at the same time, so front gear sets are set up with extra care. The pinion depth and backlash affect how the differential sits in the housing and how the axle shafts line up with the wheels. A slight error can cause noise or early wear that shows up only after many miles.
A front reverse design changes how the gear set fits the housing, so the layout should be confirmed before buying. Front gearing also interacts with the transfer case and the rest of the four-wheel-drive system, especially on trucks that switch between two-wheel and four-wheel drive. Check the front driveline and any locking hubs before the new gears go in.
- Front axle location and housing layout
- Pinion depth and backlash
- Driveline angles and CV joints
- Front hub and locking hardware
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2055-529 |
| UPC | 631410094657 |
| Axle type | Toyota 7.5 Inches; Toyota Tacoma (per title) |
| Axle location | Front |
| Design | Front reverse (per title) |
| Gear ratio | 5.29 |
| Axle manufacturer | Toyota |
Vehicle fitment
This 5.29 front reverse set is made for the front Toyota 7.5 Inch axle used in the Tacoma line. Confirm the axle position and ring gear size on your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front gear sets need measured pinion depth and backlash, which a gear shop can set with the right tools. Plan for a break-in run before heavy use.
What’s included
One 5.29 front reverse ring and pinion set for the Toyota 7.5 Inch axle, part number 2-2055-529.
Not included: Carrier bearings, shims and hardware are not part of the front reverse 5.29 set.
















