Overview
The G2 Axle and Gear 2-2046-430L is a 4.30 ratio ring and pinion for the rear Ford 10.25 Inch axle. The pinion turns 4.30 times for each ring gear revolution, a numerically high ratio that multiplies torque at the wheels for heavier use and larger tires.
The long version carries a 4.30 ratio for the rear Ford 10.25 Inch or 10.5 Inch axle types. The Performance line is made for oversized tires and high-performance engines. The housing and ring gear size should be measured before ordering.
Key features
- 4.30 gear ratio for the Ford 10.25 Inch rear axle
- Rear axle location
- Long version design
- Designed for oversized tires and high-performance engines.
- Current materials and manufacturing methods are used in its construction.
Gearing for larger tires
A numerically high ratio helps a vehicle with larger tires get moving and keep pulling on grades. The engine spins faster at a given road speed, which is the trade-off for the extra low-end force. Owners often pair a set like this with a tire size change, so the final gearing is worth checking as a whole.
Long-style gear sets are often chosen for a specific housing, so the fit deserves attention before any work starts. Compare the carrier, the housing and the pinion position against your current parts. If anything is unclear, a gear shop can measure the old gears and confirm the match before the job starts.
- Carrier and housing dimensions
- Pinion position and depth
- Speedometer calibration after the change
- Fresh seals and bearings during the rebuild
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-430L |
| UPC | 631410094473 |
| Axle type | Ford 10.25 Inches or Ford 10.5 Inches |
| Axle location | Rear |
| Version | Long (per title) |
| Gear ratio | 4.30 |
| Axle manufacturer | Ford |
Vehicle fitment
This 4.30 long set is made for the rear Ford 10.25 Inch or 10.5 Inch axle. Confirm the housing and ring gear size on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth and backlash must be measured on a 10.25 inch set, so most owners hand the install to a gear shop. Allow a break-in period before heavy loads.
What’s included
One 4.30 long ring and pinion set for the rear Ford 10.25 Inch axle, part number 2-2046-430L.
Not included: Carrier bearings, shims and hardware are not part of the 4.30 long set.
















