Overview
The G2 Axle and Gear 2-2034-456RX is a 4.56 ratio ring and pinion for the front Dana 60 axle, sold as a reverse thick front set. The pinion turns 4.56 times for each full turn of the ring gear, a numerically high ratio that multiplies torque at the wheels and suits larger tires.
The Performance Ring and Pinion line is made for oversized tires and high-performance engines, using current materials and manufacturing methods. Confirm what the reverse thick design changes and that your front Dana 60 housing matches before buying.
Key features
- 4.56 gear ratio for the front Dana 60 axle
- Front axle location
- Reverse thick design.
- Designed for oversized tires and high-performance engines.
- Made with current manufacturing methods and materials.
Before you buy
A ring and pinion set controls how the axle turns power at the wheels, so the gears and the carrier around them have to work as a single unit. Before buying, confirm that the housing is a Dana 60 in the front position and that the carrier can take the new set. Older carriers with worn bearings or cracked bearing caps should be inspected first, since a new gear set will not hold its pattern under load if the carrier flexes.
Once the gears are in, a setup shop will check tooth contact and backlash before the axle goes back on. Expect a break-in period so the surfaces settle, and watch the gear oil for fine metal during the first few drives.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2034-456RX |
| UPC | 631410094183 |
| Axle type | Dana 60 |
| Axle location | Front |
| Design | Reverse thick (per title) |
| Gear ratio | 4.56 |
| Axle manufacturer | Dana |
Vehicle fitment
The 4.56 reverse thick set is for the front Dana 60 axle. Confirm the front housing and design on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front Dana 60 gears need measured pinion depth and backlash, which is why a gear shop with setup tools is the usual installer. Plan on a break-in period afterward.
What’s included
One 4.56 reverse thick ring and pinion set for the front Dana 60 axle, part number 2-2034-456RX.
Not included: Carrier bearings and shims are not part of this set; check your carrier’s needs before installation.
















