Select your vehicle
-13%

GM 12 Bolt 9.5 Inch 4.10 Ring and Pinion Set

G2 Axle and Gear

Shop G2 Axle And Gear Ring And Pinions on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear 4.10 ratio ring and pinion set for the GM 12 bolt 9.5 inch rear axle, part 1-2090-410
  • Rear axle location
  • Universal fit listed by axle type
  • Engineered for oversized tires and high performance engines.

Description

Overview

This 4.10 set is built for the GM 12 bolt 9.5 inch rear axle in the rear position. The fit is universal by axle type, so the match is to the housing, not to a specific model.

G2 describes its performance sets as engineered for oversized tires and high performance engines, made with the latest technology and materials. A 4.10 ratio multiplies torque at the wheels more than a numerically lower ratio, which is useful with larger tires.

Key features

  • 4.10 ratio rear ring and pinion set
  • GM 12 bolt 9.5 inch rear axle type
  • Built for oversized tires and high performance engines.
  • Made with current technology and materials.

Gearing for larger tires

Numerically higher ratios like 4.10 change how a truck pulls off the line and climbs. They help when a vehicle is carrying heavy loads or running tires larger than stock, because more torque reaches the wheels before the engine works hard. The tradeoff is higher engine speed at highway pace, which can mean more noise and fuel use on long drives.

Gear changes also affect speedometer readings and drivetrain angles, so check the readings after installing new gears. Inspect the pinion seal, the carrier bearings and the axle shafts while the housing is open. Ring and pinion gears wear faster when the tooth contact is off, so verify the pattern before the vehicle goes back into regular use. Keeping the lubricant clean and at the correct level extends the life of the gears, especially on a rear axle that sees steady load.

Specifications

Brand G2 Axle and Gear
Part number 1-2090-410
UPC 631410136210
Gear ratio 4.10
Axle location Rear
Axle type GM 12 bolt 9.5 inch
Popular axle manufacturer GM

Vehicle fitment

The 4.10 set is matched to the GM 12 bolt 9.5 inch axle type. Confirm the housing size before ordering.

Only the GM 12 bolt 9.5 inch is named for this 4.10 set. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A driveline shop should set pinion depth, backlash and bearing preload on the 4.10 12 bolt gears, followed by a break-in period.

What’s included

A 4.10 ring and pinion set for the GM 12 bolt 9.5 inch.

SKU: G/21-2090-410 Category:

Specification

Shipping weight 21.00 lbs
Package dimensions 12.00 × 11.00 × 5.50 in
brands

Questions & Answers

Does 1-2090-410 fit the GM 12 bolt 9.5 inch rear axle?

Yes. It is made for the GM 12 bolt 9.5 inch rear axle in the rear location. Because the fit is by axle type, confirm the housing size before ordering.

Is this a 4.10 ratio set?

Yes. It is a 4.10 ratio ring and pinion set, which is designed for oversized tires and high performance engines. A numerically higher ratio multiplies torque at the wheels more than a lower one.

Is a carrier named for this set?

No carrier is named. Check the carrier for the 4.10 ratio before installing, and have a driveline shop set pinion depth and backlash.

Can a 4.10 set be used with a limited-slip differential?

Usually yes, as long as the carrier and ring gear fit the housing and the limited-slip unit is matched to the gear set. Check the clutch pack or locking parts for wear when the carrier is opened, since they often need attention during a gear swap.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop G2 Axle And Gear Ring And Pinions on Amazon