Overview
The G2 Axle and Gear 2-2043-456 is a 4.56 ratio ring and pinion for the rear Toyota 8 Inch V6 axle. The pinion turns 4.56 times for each ring gear revolution, a numerically high ratio that multiplies torque at the wheels and suits larger tires.
The set is for rear Toyota 8 Inch or 7.5 Inch axles. The V6 designation does not identify a specific vehicle, so measure the ring gear and confirm the axle before ordering. The Performance line is made for oversized tires and high-performance engines.
Key features
- 4.56 gear ratio for the rear Toyota 8 Inch V6 axle
- Rear axle location
- Ring gear and pinion supplied as one set
- Designed for oversized tires and high-performance engines.
- Made with current technology and materials.
Matching the housing
Matching a rear Toyota axle starts with the ring gear, since its diameter and tooth count decide whether the new set fits the carrier. Measure the ring gear across the teeth and compare the result with the housing before buying. A V6 designation alone does not settle the match.
Carrier bearings, pinion depth and backlash are all part of the install, and a gear shop with setup tools is the usual place to handle them. Keep the old carrier shims and bearings on hand for reference, since their wear pattern can reveal how the axle was running.
A 4.56 ratio multiplies torque at the wheels and suits larger tires, with higher engine speed on the highway as the trade. Allow a break-in period after installation and check for leaks at the axle seals.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2043-456 |
| UPC | 631410113174 |
| Axle type | Toyota 8 Inch or Toyota 7.5 Inches |
| Axle location | Rear |
| Gear ratio | 4.56 |
| Axle manufacturer | Toyota |
Vehicle fitment
This 4.56 set is for rear Toyota 8 Inch or 7.5 Inch axles. The V6 designation does not identify a vehicle, so measure the ring gear and confirm the axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and carrier preload need measured setup, so a gear shop with the right tools is the usual installer. Allow a break-in period afterward.
What’s included
One 4.56 ring and pinion set for the rear Toyota axle, part number 2-2043-456.
Not included: Bearings, shims and hardware are not included in this set.
















