Overview
The G2 Axle and Gear 1-2096-513 is a 5.13 ratio ring and pinion set for a GM 9.25 inch axle with independent front suspension. The pinion turns 5.13 times for each full turn of the ring gear, a numerically high ratio that multiplies torque at the wheels.
The set is for a GM 9.25 inch ring gear, a specific axle size, so the axle on your vehicle must match the ring gear diameter and the independent front suspension layout before ordering.
Key features
- 5.13 gear ratio
- GM 9.25 inch axle size
- Noted for independent front suspension
- Original equipment specification gear set
Front axle gear swaps
On an independent front suspension axle, the ring and pinion sits in a front carrier that must fit the knuckles, axle shafts and differential housing. Matching the ring gear size and the suspension layout is the first step, and it prevents costly mismatches.
Front gear sets are often replaced together with worn axle shafts, joints and hub bearings, since the same work exposes them. Check the carrier bearings, pinion depth and backlash during installation, and keep records of the setup for later service.
A 5.13 ratio on the front also changes how the vehicle behaves at speed. Confirm the tires and speedometer setup after installation so the new gearing is accurate.
- Measure the ring gear before ordering
- Inspect front axle shafts and joints
- Replace worn hub bearings during the job
- Re-check front gear backlash after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2096-513 |
| UPC | 631410140149 |
| Axle type | GM 9.25 in. |
| Suspension | Independent front suspension |
| Gear ratio | 5.13 |
Vehicle fitment
The set is identified by the GM 9.25 inch size and independent front suspension layout. Confirm both on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front gear sets need careful pinion depth and backlash setup, so a gear shop is the usual installer. Break the set in before heavy use.
What’s included
One ring and pinion set rated 5.13 for a GM 9.25 inch independent front suspension axle, part number 1-2096-513.
Not included: Check the carrier bearings and shims against your axle before installation.









