Overview
The G2 Axle and Gear 2-2025-488 is a 4.88 ratio ring and pinion set for the AMC Model 20 axle, front or rear.
A ring and pinion set changes the axle gear ratio. G2 says its performance ring and pinion sets are designed to hold up to oversized tires and high performance engines, using modern materials and technology.
Fitment is by axle: AMC 20, in the front or rear position.
Key features
- 4.88 gear ratio
- For the AMC Model 20 axle
- Front or rear axle location
- Performance ring and pinion set
- Designed by G2 for oversized tires and high performance engines
Choosing a ratio for your setup
The ratio sets how the engine’s power reaches the ground. A numerically higher ratio multiplies torque at the wheels, which helps with heavier tires and steep climbs, but it also raises engine speed at highway speed. Tire diameter, transmission and engine output all shape the final result, so the choice should be made together with those parts.
Gear sets are usually replaced with the carrier bearings and pinion bearings in good condition. Old bearings can wear unevenly and change the gear mesh, so inspect them during the swap. Fresh gear oil suited to the axle is part of a complete install.
- Confirm the tire diameter before choosing a ratio
- Inspect the carrier bearings during the swap
- Replace the gear oil after the break-in period
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2025-488 |
| UPC | 631410093711 |
| Product type | Ring and pinion gear set |
| Gear ratio | 4.88 |
| Axle type | AMC 20 |
| Axle manufacturer | AMC |
| Axle location | Front or rear |
| Fitment type | Matched to the AMC 20 axle by axle type. |
Vehicle fitment
The G2 2-2025-488 is matched to the AMC 20 axle rather than to a vehicle. No vehicles with years or chassis codes are stated.
Confirm that your axle is an AMC 20 before ordering, and that the ratio suits your tire size and drivetrain. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Gear setup is professional work, so have a qualified installer handle pinion depth, backlash and preload with the correct tools.
- Use the correct gear oil, and re-check for leaks and tightness after the first miles of break-in.
- Confirm the axle is an AMC Model 20 before disassembling anything.
- Gear setup, including pinion depth and backlash, calls for the correct tools and experience, so use a qualified professional.















