Overview
The G2 Dana 44 Front Reverse 3.73 Ratio Ring and Pinion, part number 2-2033-373R, is a 3.73-ratio front reverse gear set for the Dana 44 front axle. G2 gives the axle location as front only.
G2 describes its sets as engineered for the most demanding applications, built with computer heat-treated 8620 steel and the latest manufacturing technology.
Key features
- 3.73 gear ratio in a front reverse design
- Made for the front axle location
- Computer heat-treated 8620 steel.
Front reverse basics
A front reverse ring and pinion is set up differently from a standard front gear set, so the rotation and mounting direction must match the axle. That is why the axle position matters so much here. Before ordering, identify the front housing on your truck and confirm the carrier style, since a mismatch can cost time and parts.
Setting up a front reverse set takes careful pinion depth, backlash, and preload work. A shop with the proper tools can check the contact pattern and confirm the bearings are seated. After installation, check for leaks and listen for noise during the first short drives, then recheck the setup after the initial break-in period.
- Verify the front axle location before ordering
- Confirm the carrier style matches the housing
- Set pinion depth, backlash, and preload with proper tools
- Recheck the setup after break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2033-373R |
| UPC | 631410093964 |
| Axle type | Dana 44 |
| Axle location | Front |
| Gear ratio | 3.73 |
| Gear material | Computer heat-treated 8620 steel |
Vehicle fitment
It is made for the Dana 44 front axle and is not built for a particular vehicle. Check the carrier and axle before installing.
Installation notes
Front reverse gears should be set up by a shop with the proper pinion depth and preload tools before the axle goes back into use.














