Overview
The G2 Axle and Gear 2-2011-486 is a 4.86 ratio ring and pinion for the rear Ford 9 inch axle. It is a universal fit by axle type, so it is matched to the axle size rather than to a particular model.
G2 says its gear sets are made for oversized tires and high performance engines, with the latest technology and materials. The 4.86 ratio is a numerically higher gear, so it gives more torque multiplication at the wheels than the lower ratios.
Key features
- 4.86 ratio rear ring and pinion
- Ford 9 inch rear axle type
- Made for oversized tires and high performance engines.
- Made with current technology and materials.
Before you buy: setup and fit
A numerically high ratio like 4.86 changes how the drivetrain works at every speed. The engine turns faster for a given road speed, which helps with launches, towing and climbing but adds heat and engine wear on long highway runs.
Gears of this type depend on accurate setup. Pinion depth, backlash and bearing preload control how the teeth load, and small errors can shorten gear life. Carrier condition matters too, since a worn carrier can shift the gear pattern even when the new set is installed correctly.
Plan on a careful break-in and a follow-up inspection. Check the gear oil for metal particles after the first few drives and make sure the lubricant is the type the axle requires.
- Confirm carrier condition before installation
- Use the lubricant type the axle requires
- Check the gear pattern after the break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2011-486 |
| UPC | 631410105452 |
| Gear ratio | 4.86 |
| Axle location | Rear |
| Axle type | Ford 9 inch |
| Popular axle manufacturer | Ford |
Vehicle fitment
It fits the Ford 9 inch rear axle at a 4.86 ratio. Confirm the housing size for your vehicle before ordering.
Only the Ford 9 inch is named for this 4.86 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 4.86 Ford 9 inch gears should be set by a driveline shop, followed by a break-in period.
What’s included
A 4.86 ring and pinion set for the Ford 9 inch.















