Select your vehicle

G2 GM 7.5 Inch 10 Bolt 3.73 O.E.M. Ratio Ring and Pinion – 1-2015-373

G2 Axle and Gear

Shop G2 Axle And Gear Ring And Pinions on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear 3.73 ratio O.E.M. series ring and pinion for the GM 10 bolt 7.5 inch rear axle, part 1-2015-373
  • Rear axle location
  • O.E.M. series, made under contract with original equipment manufacturers
  • Designed to run cooler and quieter than aftermarket gears.

Description

Overview

The G2 Axle and Gear 1-2015-373 ring and pinion is a 3.73 ratio O.E.M. series gear for the GM 10 bolt 7.5 inch rear axle. Rear-location gears are sized to that housing.

This 3.73 O.E.M. set is sized for the 7.5 inch 10 bolt housing. Its gears run cooler and quieter than aftermarket gears and were produced for original equipment manufacturers.

Key features

  • O.E.M. series 3.73 ring and pinion
  • GM 10 bolt 7.5 inch rear axle
  • Rear axle location
  • Produced under contract with original equipment manufacturers.
  • Designed to run cooler and quieter than aftermarket gears.

Preparing for the swap

A gear swap goes faster with a clean bench and the right tools, and the old set should be photographed before removal so the shim and spacer positions are recorded. Keep the pinion depth shim stack together and note where each piece came from. These small details help the carrier and pinion settle into the same position they had before.

A 3.73 ratio is a middle choice between milder and taller gears, giving reasonable pulling power for everyday work and trail use. Once the set is in, have a driveline shop confirm the pattern and backlash. The axle shafts and bearings should be inspected at the same time. Drive gently through the break-in period, then check the gear oil level and look for leaks after the first few trips.

Specifications

Brand G2 Axle and Gear
Part number 1-2015-373
UPC 631410092769
Gear ratio 3.73
Axle location Rear
Axle type GM 10 bolt 7.5 inch
Popular axle manufacturer GM
Series O.E.M.

Vehicle fitment

This 3.73 ratio is for the GM 10 bolt 7.5 inch housing. Check the housing size before ordering.

Only the GM 10 bolt 7.5 inch is named for this 3.73 set. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Pinion depth, backlash and bearing preload on the 7.5 inch 3.73 gears should be set by a driveline shop, followed by a break-in period.

What’s included

A matched O.E.M. series ring and pinion for the GM 10 bolt 7.5 inch rear axle.

SKU: G/21-2015-373 Category:

Specification

Shipping weight 26.00 lbs
Package dimensions 12.00 × 11.00 × 5.50 in
brands

Questions & Answers

Is 1-2015-373 made for a GM 10 bolt 7.5 inch rear axle?

Yes, it is made for the GM 10 bolt 7.5 inch housing in the rear location. Check the housing size before ordering, because the 3.73 ratio must match your axle.

Is this an O.E.M. series gear?

Yes, it is a 3.73 ratio ring and pinion in the O.E.M. series. That series runs cooler and quieter than aftermarket gears, and its gears were produced under original equipment manufacturer contracts.

Does the 3.73 ratio need a particular carrier?

No carrier is named for this set. Check the carrier for the 3.73 ratio before installing, and have a driveline shop set pinion depth and backlash.

What tools are needed for a ring and pinion swap?

A shop needs a pinion depth gauge, a dial indicator for backlash, a torque wrench and a press or puller for bearings. Many owners pay a driveline shop for setup, since correct measurement matters more than brute force.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop G2 Axle And Gear Ring And Pinions on Amazon