Overview
The G2 Axle and Gear 97-2032-002 is a chromoly driver-side front inner axle shaft for the Dana 30 in the 1972–1981 Jeep CJ5, CJ6, CJ7 and 1981 Scrambler. It has 27 splines and accepts a 5-760X U-joint.
The 97-2032-002 is machined to accept full circle clips. It is forged from high-grade alloy steel and heat treated to exceed OEM specifications.
The 97-2032-002 is a driver-side inner shaft with 27 splines, and G2 Axle and Gear catalogs it for the standard Dana 30. The material is chromoly, and the shaft is machined for full circle clips and a 5-760X U-joint. G2 says its shafts are heat treated beyond OEM specifications.
Key features
- Chromoly inner axle shaft for the Dana 30
- 27 splines
- Accepts a 5-760X U-joint
- Machined for full circle clips
- Driver-side inner shaft
- Front axle
Choosing the matching side
The inner axle shaft carries drive torque from the differential side gear out to the U-joint, and the outer shaft carries it on to the hub. On a Dana 30 the inner end sits inside the axle tube, so it works against the flex of the suspension and any wear in the side gear splines. If the side is wrong, the U-joint angle and clip position will not line up, so confirm which side you are replacing before ordering.
Because the outer shaft, U-joint and clips are sold separately, plan the whole rebuild before starting. Inspect the U-joint cups and the retainer groove on the old shaft, and check the axle gear splines for rounding. A worn side gear will damage a new shaft quickly.
- Measure the old shaft’s spline count before ordering
- Check the retainer groove for cracks
- Inspect the outer U-joint at the same time
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2032-002 |
| UPC | 631410097047 |
| Product type | Replacement axle shaft |
| Axle type | Dana 30 Standard |
| Axle location | Front |
| Shaft position | Driver Side Inner |
| Spline count | 27 |
| Material | Chromoly |
| U-joint | 5-760X |
| Axle end | Machined for full circle clips |
| Stated application | 72-81 Jeep CJ |
Vehicle fitment
It fits the 1972–1981 Jeep CJ5, the 1972–1975 Jeep CJ6, the 1976–1981 Jeep CJ7 and the 1981 Jeep Scrambler.
The list stops at 1981, so later CJs are not covered. The CJ6 appears through 1975 and the Scrambler for 1981 only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check the U-joint is the 5-760X type before fitting the 97-2032-002.
- The 27-spline shaft has to match your Dana 30 gears.
What’s included
One driver-side inner axle shaft (97-2032-002).
Not included: the outer shaft, U-joint and clips for the 97-2032-002.





