Overview
The G2 Axle and Gear 98-2032-004 is a Dana 30 front chromoly axle kit with 30 splines for 1982–1986 Jeep CJ5, CJ7 and Scrambler models with the wide track front axle.
Owners of wide track CJs who are fitting a 30 spline aftermarket differential need shafts to match, and this kit supplies them. The differential is not part of the kit. G2 states its chromoly axles use high tensile 4340 alloy with extra material at the yoke, built for oversized tires and ultra low gearing. The application line reads: for use in 82-86 CJ wide track.
Wide track versus narrow track is the main decision on CJ front axles, and this part is the wide track version, built for the later 1982 to 1986 trucks. The shafts have 30 splines, a larger count than the 27 spline alternative G2 offers on its wide track kit. Owners would choose this one if they already have, or plan to buy, a 30 spline aftermarket differential.
Key features
- Dana 30 front axle kit in chromoly
- 30 splines
- For use with a 30 spline aftermarket differential
- Wide track CJ application
- No differential included
- Forged from 4340 alloy.
Spline count and gearing
The spline count is the link between the shafts and the differential, so it drives the whole kit choice. Because this kit is built for a 30 spline differential, the matching count must be confirmed before anything is mounted. A mismatch can lead to shafts that will not seat fully and may fail early under load.
Gearing and tire size change how much torque reaches the axle. Lower gearing and larger tires raise the stress on the shafts and joints, so a reinforced axle is a sensible choice for those setups. A wide track CJ axle with a lockable differential sees even more load during hard trail use, so the rest of the front end deserves a check as well.
- Confirm the differential spline count before purchase
- Check hub and bearing condition during the rebuild
- Review tire size and gearing together
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2032-004 |
| UPC | 631410097481 |
| Part type | Front axle kit |
| Material | Chromoly (4340 alloy) |
| Axle | Dana 30 |
| Axle location | Front |
| Spline count | 30 splines |
| Differential pairing | 30 spline aftermarket differential |
| Track width | CJ wide track |
| Differential included | None |
Vehicle fitment
It fits the wide track front axle on the 1982–1983 CJ5, the 1982–1986 CJ7 and the 1982–1985 Scrambler.
Narrow track CJs from 1981 and earlier and the CJ6 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the differential and shafts as a matched 30 spline set. If you are unsure of the differential already in the axle, count its splines first.










