Overview
The G2 Axle and Gear 95-2025-302 is a one piece replacement axle shaft for the AMC 20 rear axle, made for the passenger side of the 1982–1986 Jeep CJ5, CJ7 and Scrambler. It has 29 splines.
G2 intends it for CJs running its one piece axle kit. The maker adds that its shafts are heat treated to exceed OEM specifications and made from forged alloy steel.
The 95-2025-302 is the passenger-side partner in the 1982–1986 one piece range for the AMC 20 axle. It has 29 splines and is used with the one piece axle kit. Its shafts are built to handle more torque than factory shafts, with better materials and rolled splines.
Key features
- One piece AMC 20 rear axle shaft
- 29 splines
- Passenger-side shaft
- For 1982–1986 CJ models
- Forged, heat treated alloy steel
- Used with the one piece axle kit
Before you install
A one piece axle shaft carries drive torque from the differential to the wheel, so the shaft, bearings and seal must work together. Before buying, confirm the axle housing is an AMC 20 and that the vehicle has the one piece axle kit. Count the splines on the old shaft and compare them with the new one, since a mismatch will not seat in the gears. Note the side as well, because passenger and driver shafts are different parts.
Once installed, re-check the wheel nut torque after the first few drives and inspect the seal for leaks. Old shafts that show twisted splines, cracked flanges or a grinding noise on turns are worn and should be replaced. When one side is replaced, check the other side for the same wear, since both shafts have been under the same load.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2025-302 |
| UPC | 631410096736 |
| Product type | Replacement axle shaft |
| Axle type | AMC 20 |
| Axle location | Rear |
| Shaft position | Passenger Side |
| Spline count | 29 |
| Stated application | 82-86 Jeep CJ w/One Piece Axle Kit |
Vehicle fitment
It fits the 1982–1983 Jeep CJ5, the 1982–1986 Jeep CJ7 and the 1982–1985 Jeep Scrambler.
The CJ5 is listed through 1983 and the Scrambler through 1985. A CJ built before 1982 is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Confirm the axle uses the one piece axle kit.
- Match the shaft’s 29 splines to your gears.
What’s included
One passenger-side one piece axle shaft (95-2025-302).
Not included: Confirm whether your installation needs the axle kit and wheel studs before starting.









