Overview
The G2 Axle and Gear 97-2032-004 is a chromoly driver-side front inner axle shaft for the Dana 30 in the 1972–1981 Jeep CJ5, CJ6, CJ7 and 1981 Scrambler. It has 30 splines and accepts a 5-760X U-joint.
The 97-2032-004 is machined to accept full circle clips. Construction is forged high-grade alloy steel with heat treatment above OEM specifications.
The 97-2032-004 has 30 splines instead of 27, which is its main distinction. It is a driver-side chromoly inner shaft for the standard Dana 30, machined for full circle clips and a 5-760X U-joint. G2 Axle and Gear says its shafts are heat treated to exceed OEM specifications.
Key features
- Chromoly inner axle shaft for the Dana 30
- 30 splines
- Accepts a 5-760X U-joint
- Machined for full circle clips
- Driver-side inner shaft
- Front axle
Matching spline counts
Spline count is the first thing to match on a Dana 30 inner shaft, because the shaft has to mesh with the side gear inside the differential. A shaft with the wrong count will not seat, and forcing it will strip the gear teeth. Compare the old shaft’s splines with a caliper or by sight before ordering, and keep the old part as a reference until the new one is confirmed.
Once the spline count is confirmed, inspect the axle gear and the shaft end together. Light polishing on the splines is normal, but rounded teeth or a lip at the step mean the shaft or gear is worn. Replacing the shaft alone will not fix a damaged gear, so check both before reassembly.
- Confirm spline count against the old shaft
- Look for polished or rounded spline teeth
- Check the side gear for matching wear
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2032-004 |
| UPC | 631410097061 |
| Product type | Replacement axle shaft |
| Axle type | Dana 30 Standard |
| Axle location | Front |
| Shaft position | Driver Side Inner |
| Spline count | 30 |
| Material | Chromoly |
| U-joint | 5-760X |
| Axle end | Machined for full circle clips |
| Stated application | 72-81 Jeep CJ |
Vehicle fitment
This shaft covers the 1972–1981 Jeep CJ5, 1972–1975 CJ6, 1976–1981 CJ7 and 1981 Scrambler.
Only 1972–1981 CJs and the 1981 Scrambler are named, so check later years with G2. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check the U-joint is the 5-760X type before fitting the 97-2032-004.
- The 30-spline shaft has to match your Dana 30 gears.
What’s included
One driver-side inner axle shaft (97-2032-004).
Not included: the outer shaft, U-joint and clips for the 97-2032-004.







