Overview
The G2 Suzuki Birfield CV Style Chromoly Inner Axle Shaft, part number 97-2081-003, is a front inner shaft for the passenger side, sized to a Suzuki 6.875 inch axle type with 25 splines. It is a CV style chromoly inner shaft.
The shaft is forged from high grade alloy steel and heat treated, which G2 states exceeds OEM specifications. G2 also cites rolled splines and better materials as part of its high torque design.
Key features
- Inner CV style design.
- Chromoly construction.
- Heat treated to exceed OEM specifications.
- Rolled splines and improved materials
Passenger side service tips
The passenger side inner shaft works the same way as the driver side, carrying drive torque from the differential to the front hub while the suspension moves. Because both shafts see similar loads, a worn shaft on one side often means the other side is near the same condition.
When removing the old shaft, note how the inner end is retained and what the joint end looks like. Keep the boot and seal area clean before fitting the new unit. A new shaft should slide in without forcing, and any binding means the orientation or spline fit needs checking.
- Inspect both inner seals while the axle is out
- Replace worn retaining hardware
- Check the joint for smooth movement before fitting
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2081-003 |
| UPC | 631410107487 |
| Axle manufacturer | Other |
| Axle type | Suzuki 6.875 inch |
| Axle location | Front |
| Shaft location | Passenger side inner |
| Spline count | 25 splines |
| Material | Chromoly, forged high grade alloy steel, heat treated |
| Fitment category | Universal Fit (as published) |
Vehicle fitment
No vehicle years or models are published, and the fitment field reads Universal Fit. The Suzuki 6.875 inch axle type and 25 spline count are the figures to match against your vehicle before fitting.
The driver side inner shaft is a separate part number and is not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before installing, compare the joint end and the 25 splines of the old passenger side shaft with this one. Inner shaft removal usually involves the differential side of the axle, so a qualified mechanic should do the work.
What’s included
One inner CV style axle shaft for the passenger side.
Not included: hubs, bearings, seals or hardware; check these against your installation before starting.












