Overview
The G2 Axle and Gear 97-2041-006 is a Toyota Birfield CV style big spline chromoly inner axle shaft, a 30 spline passenger side short axle that information for the G2 97-2041-006 says is for use in 79-85 Toyota P/U and Forerunner.
The shaft is forged from high grade alloy steel and heat treated. It is a front axle shaft, 15.25in. overall length, and it requires an aftermarket CV. It is a universal fit part with a Toyota 8 Inches axle type.
G2 Axle and Gear says its high strength axle shafts are engineered to withstand the added load of high torque applications and to fix the common faults of factory shafts. The shaft is forged from high grade alloy steel and heat treated to exceed OEM specifications.
G2 adds that Big Spline options, rolled splines and better materials allow you to run larger tires with less risk of failure. This part is the inner shaft on the passenger side of a front axle with a Birfield CV style joint and needs an aftermarket CV.
Key features
- Chromoly inner axle shaft, Birfield CV style big spline
- 30 spline, 15.25in. overall length
- Passenger side short axle, front
- Forged from high grade alloy steel and heat treated
- It fits 79-85 Toyota P/U and Forerunner models.
- Requires use of an aftermarket CV
Choosing and fitting an inner shaft
The inner shaft carries torque from the transfer case or differential to the CV joint, so its splines have to mesh cleanly with both ends of the drivetrain. Before buying, check the spline count, overall length and axle type against the axle you are replacing. The CV joint is a separate purchase, so match it to the shaft as well as the vehicle.
Replacement shafts are usually inspected together with the boot, the joint and the outer shaft end. A worn spline or a cracked boot allows grit into the joint, which speeds wear. Lubricate the joint as its design calls for, and use clean fasteners and the specified torque when reinstalling.
- Match spline count before ordering
- Replace the CV boot with the shaft if torn
- Check the outer axle end for wear
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2041-006 |
| UPC | 631410107562 |
| Part type | Inner axle shaft, Birfield CV style big spline |
| Material | Chromoly |
| Spline | 30 Splines |
| Overall length | 15.25in. |
| Axle location | Front |
| Axle shaft location | Passenger side inner (short axle) |
| Axle type | Toyota 8 Inches |
| Popular axle manufacturer | Toyota |
| Requires | Aftermarket CV |
| Fit type | Universal fit |
Vehicle fitment
It fits 79-85 Toyota P/U and Forerunner models, named in short form without exact model names or trims. Confirm your vehicle’s year, model and trim before ordering.
The part is a passenger side short axle only and needs an aftermarket CV. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Axle and driveline work is safety-critical, so professional installation is recommended. Follow the vehicle’s factory service procedure, tighten fasteners to the specified torque, and re-check them and fluid levels after the first miles of driving.
What’s included
Information for the G2 97-2041-006 describes one inner axle shaft.
Not included: An aftermarket CV is required and is not included.











