Overview
The Fabtech FTS21128 is a pair of upper control arms with a Uniball joint for the 2007–2018 Chevrolet Silverado 1500 and GMC Sierra 1500. They replace the factory upper ball joint arms and are built for trucks that need more strength and alignment range.
Extra caster is built into the arms to help with alignment on leveling kit setups. The arms allow more wheel travel when paired with Dirt Logic 2.5 Coilover shocks.
Key features
- 1 inch inside diameter stainless American Uniball
- 4340 heat treated Uniball pin that fits the factory ball joint taper
- Additional caster built into the arms
- Chromoly tubing for a firmer road feel
- Designed for more wheel travel with Dirt Logic 2.5 Coilover shocks
Leveling kit and travel
Upper control arms guide the top of the wheel as the suspension moves. On a leveling kit or lifted truck, the geometry can drift, which is why built-in caster and a matched coilover setup matter. Changing one part of the front end changes the others, so the arms, shocks and alignment should be considered together.
Chromoly tubing is stiff, so the ride can feel firmer than with stock arms. Uniball joints also take less flex than rubber bushings. Check the joint and pin for play during routine service, and look at the spindle taper where the pin seats, since a loose fit there is a common sign of wear.
- Match the shocks to the intended lift
- Inspect the Uniball and boot periodically
- Recheck alignment after any change to ride height
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21128 |
| UPC | 674866036819 |
| Position | Front upper |
| Lift range | 0 to 6 inch |
| Joint | 1 inch ID stainless American Uniball |
| Pin | 4340 heat treated |
| Tubing | Chromoly |
| Quantity | Pair |
Vehicle fitment
The manufacturer fitment list gives 2007–2018 Chevrolet Silverado 1500 (Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT, XFE) and 2007–2018 GMC Sierra 1500 (Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE).
Model years before 2007 and after 2018 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Uniball pin is sized for the factory ball joint taper, so the spindle keeps its stock machining. After installation, have the alignment checked.
What’s included
A pair of upper control arms with Uniball joints and pins.
Not included: Dirt Logic 2.5 Coilover shocks.









