Overview
The Fabtech FTS21126 is a 4 inch uniball upper control arm lift kit for the front upper position. It comes with heavy duty control arms and bushings. No vehicle is named for this part number.
Key features
- Uniball upper control arm design
- Heavy duty control arms
- Bushings included
- Front upper position
Uniball joints and upper arms
Upper control arms locate the axle and carry braking and steering loads, so changing their length or joint design affects caster, camber and steering feel. Uniball joints allow a wider range of movement than rubber bushings, which is useful on articulating suspensions but needs regular checks for wear. Keep the joints clean and protected from grit.
Replacing upper arms usually involves matching the lower arms, the track bar and the steering components so the suspension stays aligned. An alignment is needed after any control arm change because the geometry moves. Inspect the mounting hardware and bushings during each service.
- Check joint play by hand at the arm
- Inspect boots and grease fittings for damage
- Retorque mounting bolts after the first drives
- Schedule an alignment after installation
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21126 |
| UPC | 674866037106 |
| Lift height | 4 inch |
| Position | Front upper |
| Fitment type | Direct fit |
Vehicle fitment
Match your truck’s year, model and trim before selecting this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Control arm and lift kits change suspension geometry, so have the alignment checked after installation.
What’s included
Heavy duty control arms and bushings.









