Select your vehicle

Fabtech Short Arm Rear Lower Control Arms with 5 Ton Joints – FTS24122

Fabtech

Shop Jeep Wrangler JK Control Arms on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fabtech short arm rear lower control arms with 5 Ton joints, part number FTS24122
  • Rear lower position
  • 5 Ton joint rating
  • Fits 2007 to 2018 Jeep Wrangler JK

Description

Overview

The Fabtech Short Arm Rear Lower Control Arms with 5 Ton Joints, part number FTS24122, are rear lower control arms for the Jeep Wrangler JK. The arms have 5 Ton joints. They fit 2007 to 2018 JK models in the two-door and four-door trims covered here.

Short arm lower control arms are a common rear suspension upgrade on lifted Jeeps. They change the length of the rear lower link, which changes how the axle is located and the angle of the pinion relative to the driveshaft, so the arm length should suit the lift.

The arms are designed using a software-driven process, with in-house fabrication and testing. No load ratings or test results are available for them, so verify the joint capacity for your use.

Arm dimensions, the intended lift height and joint specifications beyond the 5 Ton name are not available. Confirm arm length against your lift height and check the joint details before ordering.

Key features

  • Short arm rear lower control arm design
  • 5 Ton joints.
  • Rear lower position
  • Direct fit for 2007 to 2018 Wrangler JK
  • Part number FTS24122

Setting up a short arm

Short arms shorten the rear lower link, which moves the axle’s control point and changes how the axle sits under load. Because of that, the arm length should suit the lift and the rest of the rear suspension. A mismatch can cause driveline vibration, binding at full droop or uneven loading on the axle housing.

Short arms are often fitted alongside other rear suspension parts, such as upper links, a track bar and bump stops. Check those parts for wear before the install, and make sure brake lines and the driveline have clearance through full travel.

  • Check pinion angle after installation
  • Inspect upper links and track bar for wear
  • Confirm driveline clearance through full travel
  • Match arm length to the lift height

Specifications

Brand Fabtech
Part number FTS24122
Position Rear lower
Type Short arm
Joints 5 Ton.
Fit Direct fit

Vehicle fitment

Fabtech lists these arms for 2007 to 2018 Jeep Wrangler (JK) models, including two-door and four-door bodies. The trims named include 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X.

Wrangler TJ, JL and LJ models are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Short arms change pinion and driveline angles, so check those angles after installation. Use a procedure suited to rear lower arm replacement.

What’s included

The short arm rear lower control arms with 5 Ton joints.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Fabtech FTS24122 fit a 2016 Jeep Wrangler JK?

Yes. It fits 2007 to 2018 Wrangler JK models, so a 2016 JK falls within those years. Two-door and four-door trims are covered.

What are the 5 Ton joints?

The arms use 5 Ton joints. Confirm the joint details against your planned use before ordering, and inspect the joints at each service.

Why are short arms used on a lifted Jeep?

Short arms change the length of the rear lower link, which changes how the axle is located and the driveline angle. The arm length should match the lift, so check the driveline angles after installing them.

Do short arms need a pinion angle check after installing?

Yes, in most cases. Short arms shift the axle position, which changes pinion angle, so check driveline angles after installation and adjust as needed. Driveline vibration often points to a problem here.

Are other rear parts often replaced with short arms?

Often yes. Short rear lower arms change how the axle sits, so the upper links and track bar are commonly checked or replaced together. Inspect them for wear before finishing the install.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Control Arms on Amazon