Overview
The Fabtech FTS24225 is a rear long arm kit for the 2021–2026 Jeep Wrangler JL, covering the 2-door Rubicon, Sport and Sport S and the Unlimited 4-door Rubicon, Sahara, Sport and Sport S. It is the rear partner of the FTS24224 front kit and belongs to the same JL Crawler long arm line, with 5 Ton link arms mounted to the frame.
The rear links attach to new mounts on the side of the frame, which raises ground clearance and approach angle. The link arms are 2-inch OD tubing with a .313 thick wall, and the upper and lower arms use 5 Ton joints. The arms are built for hard off-road use and run smoothly on the street, and the geometry keeps handling consistent through the full travel range. They are designed to work with the front kit as a full long arm system.
Key features
- Rear links mounted to new frame-side brackets
- Raises ground clearance and approach angle through the frame-side mounts
- 2-inch OD, .313 thick wall link arms
- 5 Ton joints on the upper and lower arms
- Smooth, quiet operation on the street.
Long arm geometry and daily driving
Long arm suspensions take the place of stock control arms, so they control axle position and wheel travel. On a Wrangler JL, the rear links set how the axle moves over bumps and under throttle, which affects both wheel travel and straight-line stability. Stronger joints and longer arms are often paired with new brackets and bushings so the whole assembly moves together.
Before installing, plan on a driveline check and an alignment, since changing the axle location changes angles. Inspect the joints, mounts and bolts after the first few drives and after hard trail use. Look for play, clunks over bumps, or uneven tire wear, which can signal that a joint or bushing needs attention.
- Replace worn bushings alongside the arms
- Torque mounts after the first drives
- Keep joint grease fittings serviced
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS24225 |
| Type | Rear long arm kit |
| Link arm tubing | 2-inch OD, .313 thick wall |
| Joints | 5 Ton |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2021–2026 Jeep Wrangler JL, including 2-door Rubicon, Sport and Sport S trims and Unlimited 4-door Rubicon, Sahara, Sport and Sport S trims.
The list does not cover the JL from 2018–2020 or the JK Wrangler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear long arms change the rear axle location and the driveline angle, so have the driveline angles checked after installation. An alignment is also recommended.
What’s included
Rear link arms and 5 Ton joints are included. Check the package contents against your installation before starting.










