Overview
The Fabtech K2130 is a 6-inch basic lift for the 2008–2015 Ford F-350 Super Duty. It uses drop brackets so the stock radius arm stays in place, and it is a basic alternative to the radius arm and 4-link systems.
The front is lifted with radius arm drop brackets and coil springs, and the rear uses lift blocks with U-bolts. A trac bar relocation bracket, a pitman arm for steering correction, sway bar drops and bump stop extensions are included. Rear replacement leaf springs come with a U-bolt kit. Shocks are included, and tires up to 325/65R18 on 18×9.5 wheels with a 4 3/4-inch backspace are supported.
Key features
- 6-inch lift, range 5 to 6.99 inches
- Basic drop bracket system
- Uses the stock radius arm
- Coil springs at the front
- Trac bar relocation bracket and pitman arm
- Shocks included
Radius arm drop considerations
A drop bracket lift keeps the stock radius arm and mounts the brackets to it, which changes the arm angle and the position of the axle. The coil springs set the front height, so the spring rate and seat condition matter for the ride. Check the radius arm bushings for wear before the brackets are installed.
Trac bar relocation brackets move the lateral link, and that changes steering feel and alignment. The pitman arm corrects steering geometry after a lift, so the steering linkage should be checked during the install. Rear leaf springs and U-bolts should be inspected for loose hardware once the truck has been driven for a while.
- Inspect radius arm bushings before fitting brackets
- Check steering linkage after installing the pitman arm
- Recheck trac bar bolts after the first drives
- Look over rear leaf spring hardware periodically
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2130 |
| UPC | 70000583666 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Bracket |
| Front lift | Radius arm drop brackets and coil springs |
| Rear lift method | Lift blocks and U-bolts |
| Steering correction | Pitman arm |
| Tire and wheel fit | Up to 325/65R18 on 18×9.5 with 4 3/4-inch backspace |
| Shocks | Included |
Vehicle fitment
It fits the 2008–2015 Ford F-350 Super Duty, including the Cabela’s, FX4, Harley-Davidson, King Ranch, Lariat, Platinum, XL and XLT models.
The list covers the F-350 Super Duty only, not the F-250. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The drop brackets mount to the existing radius arm. Check the pitman arm and rear leaf springs against the truck before starting.
What’s included
Radius arm drop brackets, coil springs, a trac bar relocation bracket, a pitman arm, sway bar drops, bump stop extensions, replacement rear leaf springs, a U-bolt kit and shocks.









