Overview
The Fabtech K5000 is a 6-inch performance lift for the 2003–2008 Hummer H2 Base. It uses extended steering knuckles and high clearance crossmembers at the front, similar to Fabtech’s other IFS systems. Several H2-specific changes are part of the kit. The lift height range is 5 to 6.99 inches.
Because the H2 has a full-time transfer case, the kit includes a CV style front driveshaft for smooth driveline operation. It also has two 1/4-inch thick skid plates, one for the front differential and one for the transfer case. At the rear, factory air bag H2 models use a bag spacer, and coil spring models use replacement coil springs made for the driver and passenger sides. Front and rear performance shocks are included.
Key features
- 6-inch lift, range 5 to 6.99 inches
- Extended length steering knuckles
- High clearance crossmembers
- CV style front driveshaft
- Two 1/4-inch thick skid plates
- Front and rear performance shocks
Driveline and transfer case considerations
A full-time transfer case keeps the front and rear driveshafts turning at all times, which makes front driveline angles and skid plate placement important. A CV style front driveshaft is designed to handle the angle changes that come with a lift, and it should be inspected for torn boots or leaked grease. Skid plates protect the differential and transfer case from rocks and debris on rough trails.
Check that the skid plates clear the crossmembers and remain bolted tight after each trail outing. Vibration at highway speeds can point to a driveline angle problem, so it is worth investigating early. Before buying, confirm whether the truck has air bags or coil springs at the rear, because the rear parts differ. Keep the differential fluid level in mind when the front driveline changes during the install.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K5000 |
| UPC | 70000583805 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Front lift | Crossmember, steering knuckles and coil springs |
| Rear lift | Air bag spacer on air bag models; replacement coil springs on coil spring models |
| Driveshaft | CV style front driveshaft included |
| Skid plates | Two 1/4-inch thick, front differential and transfer case |
| Tire and wheel fit | 37/12.50R17 on 17×10, 40/13.50R17 on 17×10, 38/15.50R18 on 18×10, 37/13.50R20 on 20×10; minor trimming |
| Shocks | Front and rear performance shocks, included |
Vehicle fitment
It fits the 2003–2008 Hummer H2 Base.
The list covers the H2 Base in those years only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The H2 rear lift depends on the vehicle’s suspension: air bag models use the bag spacer, and coil spring models use the replacement springs. The CV style driveshaft is part of the kit, so the front driveline is changed during the install.
What’s included
Extended steering knuckles, crossmembers, a CV style front driveshaft, two 1/4-inch skid plates, the rear bag spacer or coil springs and front and rear performance shocks.









