Overview
The Fabtech K6003 is a 6-inch basic lift for the 2006–2011 Nissan Frontier LE, Nismo Off-Road, PRO-4X and SE. It covers a lift height range of 3 to 4.99 inches. The kit uses Fabtech’s IFS approach, with extended length steering knuckles that let the factory upper control arms stay in the stock location while the lower control arms are relocated.
The lower arms are secured to the frame by arched crossmembers made from 1/4-inch thick plate. Front lift comes from a steel coilover shock spacer system that keeps the stock ride. The rack and pinion stays in the factory location, which makes installation longer. The kit includes a 1/4-inch thick differential skid plate and impact struts. The rear uses a block and U-bolt system, and the shocks are rear performance units only.
Key features
- 6-inch basic system
- Extended length steering knuckles
- Factory upper control arms kept in the stock location
- Arched 1/4-inch thick steel crossmembers
- Steel coilover shock spacer system
- 1/4-inch thick differential skid plate and impact struts
Before you install
An IFS lift is a different job from a leaf spring or solid axle lift, because the front steering and suspension pivot points change with the lower arm relocation. Before starting, read through the full sequence and make sure the crossmember, knuckles and spacers are all present. Keeping the factory upper control arms in place helps preserve the stock geometry up top, but the lower arms still need careful alignment at the frame.
After the first few drives, recheck every bolt in the front end, especially the crossmember fasteners and the steering knuckle hardware. Look for clicking, rubbing on the skid plate or uneven tire wear, since these point to a change in geometry. A pre-install parts check and a post-install alignment are both worth the time.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K6003 |
| UPC | 70000583857 |
| Lift height | 6 inches (range 3 to 4.99 inches) |
| Suspension type | Knuckle |
| Front lift | Crossmember, factory coilover spacers and steering knuckles |
| Rear lift method | Lift blocks and U-bolts |
| Clearance | 315/70R17 tires on 17×8 wheels with 5-inch backspace |
| Shocks | Rear performance shocks only |
Vehicle fitment
It fits the 2006–2011 Nissan Frontier LE, Nismo Off-Road, PRO-4X and SE.
It fits only Frontier models from those years. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The rack and pinion stays in the factory location, which increases installation time. The factory upper control arms are kept in place, while the lower arms are relocated.
What’s included
Extended length steering knuckles, arched crossmembers, steel coilover spacers, a 1/4-inch thick differential skid plate, impact struts, bump stop spacers, a rear block and U-bolt system and rear performance shocks.









