Overview
The Fabtech K1137 is a 6-inch basic lift system for the 2019–2026 GMC Sierra 1500 Denali. It keeps the Denali’s factory Adaptive Ride Control shock absorbers, which GM electronically controls to adjust to road conditions, and it fits them with heavy duty relocation brackets. The rated lift range is 6 to 7 inches.
The system is designed to keep the tires under the fenders with a near-stock track width, and its steering knuckle geometry gives a tight lock-to-lock turning radius. The suspension has zero bump steer through the full cycle. The rear is lifted by replacing the factory 2-inch block with a 5-inch block and U-bolt system, and the front uses 1/4-inch steel crossmembers with triple differential mounts. The suspension is set up so the Adaptive Ride Control shocks work at the new lift height. Powertrain coverage on the kit is 5 years or 60,000 miles.
Key features
- Keeps the factory Adaptive Ride Control shocks
- Heavy duty relocation brackets for the shocks
- Zero bump steer through the full suspension cycle
- Near-stock track width
- 1/4-inch steel crossmembers with OE style alignment cam pins
Working with factory ride control
Adaptive ride control shocks adjust their firmness based on sensor input, so they depend on the truck reading its own height and motion correctly. A lift changes the ride height and the suspension geometry, which can affect how those sensors interpret the road. After installation, watch the dashboard for any ride control warning and confirm the system responds normally on a short test drive.
The relocation brackets carry the shocks in a new position, so their bolts see more movement than the factory mounts did. Keeping them clean, tight and free of rust helps the shocks stay in the right place. Electronic shock components should be serviced by a qualified shop, and wiring should be left undisturbed unless a technician is present.
- Watch for ride control warnings after installation
- Keep relocation bracket bolts clean and tight
- Recheck bracket hardware after the first few drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1137 |
| Lift height range | 6 to 7 inches |
| Rear lift component | 5-inch block and U-bolt, replacing the factory 2-inch block |
| Shocks | Factory Adaptive Ride Control, retained |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019–2026 GMC Sierra 1500 Denali.
Only the Denali trim is covered. Other Sierra 1500 trims and Silverado 1500 trucks are not part of this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear lift replaces the factory 2-inch block with a 5-inch block, and the lift changes alignment and driveline angles. Have the alignment checked after installation, and confirm the Adaptive Ride Control shocks work with the new lift height.
What’s included
Relocation brackets for the factory Adaptive Ride Control shocks, the front steel crossmembers and differential mounts, and the rear 5-inch block and U-bolt system.
Powertrain coverage on the kit is 5 years or 60,000 miles.









