Overview
The Fabtech K1024 is a 6-inch suspension lift for the 2007–2013 Chevrolet Silverado 1500 and GMC Sierra 1500, including the Hybrid trucks in the list. It is built for the GM T900 platform and keeps the factory front coilover assemblies, using a front coilover spacer system for a ride that stays close to stock.
The system clears 35-inch tall tires and uses extended length steering knuckles to keep the track width near stock. The rear uses a block and add-a-leaf system. The setup works with factory StabiliTrak safety functions without reprogramming the vehicle computer.
The front is a coilover spacer system that works with the factory coilover assembly. The rear is a block and add-a-leaf system. The kit fits tires up to 35-inch tall.
Key features
- 6-inch title lift, with a listed range of 7 inches and up
- Front coilover spacer system keeps the factory coilover assembly
- Extended length steering knuckles
- Lower control arm crossmembers with cross tubes and tubular frame struts
- 1/4-inch steel differential skid plate
- Rear performance shocks
Keeping the factory coilovers
A coilover spacer system keeps the factory coilover assembly in place and lifts the front with spacers. That keeps the front closer to the factory ride than a full coilover replacement would, but the factory springs and shocks still set the baseline. Inspect them for sag and leaks before installing, since aging parts can affect how the lift sits.
The extended length steering knuckles keep the track width near stock, which helps with steering feel and tire wear. The rear block and add-a-leaf raise the rear, so the rear axle moves on its U-bolts and should be checked after the first drives. Rear performance shocks are fitted with the rear hardware, so check their mounts along with the block fasteners.
- Recheck the rear U-bolts after the first drives
- Inspect the coilover spacers for wear
- Check the skid plate fasteners
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1024 |
| UPC | 70000380206 |
| Lift height | 6 inches |
| Suspension type | Knuckle |
| Front components | Crossmember, coilover spacers, steering knuckles, impact struts |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Skid plate | 1/4-inch thick steel |
| Maximum tire | 35/12.50R20 on 20×9 with 5-inch backspacing |
| Shocks | Rear performance shocks |
Vehicle fitment
It fits the 2007–2013 Chevrolet Silverado 1500 and the 2007–2013 GMC Sierra 1500, including Hybrid trucks. The 2500 HD and 3500 trucks are not covered, and years outside 2007–2013 are not included. Confirm fit for your vehicle’s year, model and trim before ordering.
The list covers the 1500 trucks in those years only. The 2500 HD and 3500 trucks, and years outside 2007–2013, are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tire fit requires minor trimming with 20×9 wheels and 5-inch backspacing. The impact struts, differential skid plate and differential relocation bracket install with the lift.
What’s included
Front crossmember, coilover spacers, steering knuckles, impact struts, a differential skid plate and relocation bracket, sway bar end links, the rear block, U-bolts and add-a-leaf, and rear performance shocks.









