Select your vehicle

Fabtech 6 Inch Basic Lift Kit w/Performance Shocks – K7019

Fabtech

In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 8:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 6 inch lift for the 2005–2013 Toyota Tacoma
  • Front crossmember, steering knuckles and factory coilover spacers
  • Rear lift blocks with U-bolts and add-a-leaf
  • Impact struts, 1/4 inch differential skid plate and heavy duty tie rods
  • Part number K7019; rear shocks included

Description

Overview

The Fabtech K7019 is a 6 inch basic lift kit for the 2005–2013 Toyota Tacoma. It uses steel coilover spacers so the stock front coilover shocks can stay in use, and it adds IFS-based front components with extended length ductile iron steering knuckles and arched crossmembers.

At the rear, lift blocks with U-bolts and add-a-leaf raise the axle. The kit clears 315/70R17 tires on 17×8 wheels with a 4 5/8 inch backspace, and it requires 17 inch or larger wheels.

Key features

  • Steel coilover shock spacers that keep the stock front coilover shocks
  • Extended length ductile iron steering knuckles and arched crossmembers for ground clearance
  • 1/4 inch thick differential skid plate
  • Impact struts and heavy duty tie rods
  • Rear lift blocks with add-a-leafs, plus rear shocks
  • Lift height range of 5 to 6.99 inches

Front end and wheel choices

A spacer lift keeps the stock front end, while a full front-end installation swaps in crossmember and knuckle parts that change how the front is built. The second approach gives more ground clearance but asks more of the installer, because the brake lines, the steering and the front axle geometry all have to be checked once the parts are in.

Wheel choice is part of the lift. Taller tires need wheels with the correct backspace so they clear the front components and the fenders. Once the new wheels are on, check for rubbing at full lock and over bumps, and look at the rear lift blocks and U-bolts, since they carry more load at the new height.

Impact struts and tie rods are the parts that take the most abuse off-road. Check their bushings and ends after rough trail use, and replace them if there is play.

Specifications

Brand Fabtech
Part number K7019
UPC 70000538868
Suspension type Knuckle
Rear lift method Lift block, U-bolts and add-a-leaf
Lift height range 5 to 6.99 inches
Skid plate 1/4 inch thick differential skid plate
Tire guidance 315/70R17 on 17×8 wheels, 4 5/8 inch backspace; 17 inch or larger wheels required

Vehicle fitment

It fits the 2005–2013 Toyota Tacoma, including Base, Pre Runner and X-Runner models.

Tacoma model years outside 2005–2013 are not covered. Make sure your year, model and trim match before you order.

Installation notes

The kit relies on the front crossmember and steering knuckles, so it is a fuller front-end installation than a spacer lift. It requires 17 inch or larger wheels, and the 315/70R17 tire needs a wheel with a 4 5/8 inch backspace.

What’s included

The kit includes the front crossmember, steering knuckles, coilover shock spacers, impact struts, a differential skid plate, heavy duty tie rods, rear lift blocks with add-a-leafs, and rear shocks.

SKU: FABK7019 Category:

Specification

Shipping weight 273.60 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2013Base, Pre Runner, X-Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Fabtech K7019 work with stock Tacoma coilover shocks?

Yes. Steel coilover spacers let the stock front coilover shocks stay in place, so the front keeps its factory coilover setup. The design is intended to keep a factory-like ride.

What wheel size does the K7019 need?

Wheels must be 17 inch or larger. The kit clears 315/70R17 tires on 17x8 wheels with a 4 5/8 inch backspace.

What does the 6 inch Fabtech K7019 include for protection?

It includes a 1/4 inch thick differential skid plate and impact struts. The rear uses lift blocks with U-bolts and add-a-leafs, and the front uses steel coilover shock spacers with extended length knuckles and an arched crossmember.

How often should lift block U-bolts be checked?

Check them after the first few drives and again at each oil change. Loose U-bolts can let the axle shift, so retorque them and replace any that show stretching or rust.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon