Select your vehicle

Fabtech 6 Inch Performance Lift Kit w/Performance Shocks – K5001

Fabtech

Shop Hummer H2 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Lists the 2003–2005 Hummer H2 Base
  • 6-inch IFS-style performance lift with coilover spacers at the front
  • CV style front driveshaft and differential and transfer case skid plates
  • Air bag spacer on factory air bag H2s, replacement springs on coil spring models
  • Shocks included

Description

Overview

The Fabtech K5001 is a 6-inch performance lift for the 2003–2005 Hummer H2 Base. It uses extended length steering knuckles and high clearance crossmembers, and the front is raised with crossmembers, steering knuckles and coilover spacers. The lift height range is 5 to 6.99 inches.

The H2 has a full-time transfer case, so the kit includes a CV style front driveshaft for smooth driveline operation. Two 1/4-inch thick skid plates protect the front differential and transfer case. The rear setup depends on the truck: factory air bag H2s use a bag spacer, and coil spring models use replacement coil springs for the driver and passenger sides. Shocks are included.

Key features

  • 6-inch lift, range 5 to 6.99 inches
  • Extended length steering knuckles and high clearance crossmembers
  • Front coilover spacers
  • CV style front driveshaft
  • Two 1/4-inch thick skid plates
  • Shocks included

Choosing between rear setups

Before ordering rear parts, confirm whether the truck has factory air bags or coil springs. Air bag trucks need a different approach than coil spring trucks, and mixing parts from the two setups can leave the rear sitting unevenly. Once the right rear pieces are chosen, the front and rear heights should be compared so the truck does not sit nose high or low.

Replacement coil springs and shocks wear over time, and a lift raises the load on both. Look for sagging, leaking shock bodies, broken coil coatings and uneven ride height. Replacing worn shocks together with new springs keeps the truck handling predictably, and the driveline should be checked again after any height change.

On a heavy H2 used for towing or loaded trail trips, the rear is where extra stress shows up first, so inspect those parts more often.

Specifications

Brand Fabtech
Part number K5001
UPC 70000583806
Lift height 6 inches (range 5 to 6.99 inches)
Suspension type Knuckle
Front lift Crossmember, steering knuckles and coilover spacers
Rear lift Air bag spacer on air bag models; replacement springs on coil spring models
Driveshaft CV style front driveshaft included
Skid plates Two 1/4-inch thick, front differential and transfer case
Tire and wheel fit 37/12.50R17 on 17×10, 40/13.50R17 on 17×10, 38/15.50R18 on 18×10, 37/13.50R20 on 20×10; minor trimming
Shocks Included

Vehicle fitment

It fits the 2003–2005 Hummer H2 Base only.

The list covers the H2 Base in 2003 through 2005 only, so 2006 to 2008 H2 models are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The rear depends on the truck’s suspension, so confirm whether the H2 has air bags before ordering the rear parts. The CV style front driveshaft is part of the kit and changes the front driveline during installation.

What’s included

Steering knuckles, crossmembers, coilover spacers, a CV style front driveshaft, two 1/4-inch skid plates, the rear bag spacer or coil springs, and shocks.

SKU: FABK5001 Category:

Specification

Shipping weight 293.80 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Hummer H22003–2005Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K5001 fit a 2007 Hummer H2?

No. It fits only the 2003–2005 Hummer H2 Base, so 2007 models are outside its coverage. The 2003–2008 range applies to the K5000 and K5000M.

Does the K5001 work on an air bag H2?

Yes. Factory air bag H2s use a bag spacer at the rear, while coil spring models use replacement coil springs made for each side.

What does the K5001 include at the front driveline?

The kit includes a CV style front driveshaft, plus two 1/4-inch thick skid plates for the front differential and transfer case. Shocks are included as well.

Can I mix air bag and coil spring rear parts?

Generally no. Air bag and coil spring rear setups use different parts and mounting points, so mixing them can leave the rear unevenly lifted. Confirm which setup your H2 has before ordering, and keep the rear components matched to that setup.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Hummer H2 Lift Kits on Amazon