Overview
The Fabtech K1055 is a 4-inch Ultimate lift for the 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD and the 2011–2018 GMC Sierra 2500 HD and 3500 HD. The system provides less lift than Fabtech’s 6-inch RTS system, and it allows use of 33-inch or 35-inch tall tires with cutting for street and off-road use.
The kit uses replacement upper control arms made of 1.50-inch OD, 0.120 wall DOM tubing that attach to heavy duty ductile iron steering knuckles. The factory torsion bars stay in their stock position and use new forged adjusting keys to set the lift. Because the stock lower control arms, torsion bars and front differential are not relocated, ground clearance is not reduced.
Key features
- 4-inch lift height, range 3 to 4.99 inches
- Replacement upper control arms in 1.50-inch OD DOM tubing
- Heavy duty ductile iron steering knuckles
- Forged adjusting torsion bar keys
- Levels the stance compared with the factory nose-down rake
- Front and rear performance shocks
Before you install
Lifting a heavy-duty truck changes how the suspension and steering geometry work, so the installation should be followed in full. Once the torsion keys are set, the front end needs a professional alignment before the truck is driven on the highway. Caster and camber settings often shift when control arms are replaced, and uneven tire wear is the usual sign that the alignment was skipped.
Larger tires put more load on steering components and wheel bearings, so inspect ball joints, tie rod ends and the steering knuckles at regular intervals. Brake lines and ABS sensor wiring should be checked for slack after the lift, since the front wheels travel farther. Heavy towing and frequent off-road use make these checks more important than with a stock truck. Re-torque the hardware after the first few trail runs and keep a record of the work for future service.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1055 |
| UPC | 70000639111 |
| Lift height | 4 inches (range 3 to 4.99 inches) |
| Suspension type | Knuckle |
| Upper control arms | Replacement, 1.50-inch OD, 0.120 wall DOM tubing |
| Torsion bars | Stock position, new forged adjusting keys |
| Rear change | None; optional 1-inch rear block kit available |
| Tire and wheel fit | 33/12.50R18 on 18×9, 33/12.50R20 on 20×9, 35/13.50R18 and 35/13.50R20 with fender well cutting; 5 3/4-inch backspacing |
| Shocks | Front and rear performance shocks |
Vehicle fitment
Fits 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD models. Standard cab trucks and 17-inch wheels are not covered by this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Standard cab models and 17-inch wheels are excluded, and 1500 trucks and years outside 2011–2018 fall outside this kit’s fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 35-inch tire sizes require the fender well sheet metal to be cut. The kit does not fit standard cab trucks or 17-inch wheels, and the tire options use 5 3/4-inch backspacing.
What’s included
Replacement upper control arms, ductile iron steering knuckles, forged adjusting torsion keys, performance shocks front and rear, and the hardware for the lift. The optional 1-inch rear block kit is sold separately.









