Overview
The Fabtech K1024M is a 6-inch basic lift for the 2007–2013 Chevrolet Silverado 1500 and GMC Sierra 1500, including the Hybrid models. It is a basic version of the K1024 system, with Stealth monotube shocks at the rear, and it keeps the factory coilover assemblies at the front.
The front uses extended length steering knuckles to keep track width close to stock. Lower control arm crossmembers are reinforced with cross tubes and tubular frame struts, and a 1/4-inch thick steel skid plate protects the front differential. The kit is designed to keep the factory StabiliTrak functions working without reprogramming the vehicle computer.
Key features
- 6-inch lift in the 5 to 6.99 inch range
- Front coilover spacer system with the factory coilover assembly
- Extended length steering knuckles
- Tubular frame struts and cross-tube reinforced crossmembers
- 1/4-inch thick steel differential skid plate
- Stealth monotube shocks at the rear
Choosing a tire and wheel setup
Tire size and wheel backspacing decide whether a lift works cleanly. A wheel with too little backspacing can rub the fender or the suspension at full travel, while too much can put the tire against the inner components. Measure the backspacing of any wheel before fitting it, and check clearance at full steering lock and under compression.
Taller tires add weight and change gearing, which affects braking, acceleration and fuel use. Check the wheel bearings and hubs after changing tire size, since heavier tires put more load on them. Rotate tires and check pressures to keep wear even.
Plan for the trimming that some tire sizes require. Fender liner trimming and bumper adjustments are common with bigger tires, and the work is easier before the truck is driven with the new setup. Recheck the clearance after the first few drives.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1024M |
| UPC | 700007232691 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Front components | Coilover spacer system, extended steering knuckles |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Tire and wheel fit | 35/12.50R17 on 17×8, 325/65R18 on 18×9, 35/12.50R20 on 20×9, each with 5-inch backspacing |
| Shocks | Stealth monotube shocks at the rear |
Vehicle fitment
It fits the 2007–2013 Chevrolet Silverado 1500 and the 2007–2013 GMC Sierra 1500, including Hybrid models.
It does not fit models with Factory AutoRide shocks or all-wheel drive models. It is not for 2500 HD or 3500 trucks, or model years outside 2007–2013. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Minor trimming is needed with each tire size, so check clearance against the wheels you plan to run. The steering knuckles are extended, so set the front alignment after installation.
What’s included
Front coilover spacer system, extended steering knuckles, crossmember impact struts, the 1/4-inch steel differential skid plate, the rear block, U-bolts and add-a-leaf, and Stealth monotube shocks at the rear.









