Overview
The Fabtech K1100 is a 6-inch Basic GEN II lift kit for Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. It covers 2017 and 2018 Silverado 1500 models and 2014, 2017 and 2018 Sierra 1500 models. The lift height range is 6 to 7 inches, and the kit is a direct fit.
Confirm the shock package before ordering, since the Magneride shocks named in the title need to be verified. The Gen II design keeps the factory track width so tires stay under the fenders. The front sway bar keeps its stock end links and mounting holes.
Key features
- 6-inch Basic GEN II design
- Factory track width retained
- No CV spacers, impact struts or add-a-leafs required for installation
- Front sway bar uses stock end links and mounting holes
- Front differential relocated to reduce vibration at higher four-wheel-drive speeds
- Upper coilover spacer lifts from the top of the shock
- 1/4-inch thick steel brackets and skid plate
Tire and driveline planning
Tire choice sets how the lifted truck fits under the fenders. Wheel backspacing, tire diameter and trimming all affect rubbing, so confirm the wheels match the sizes this kit is designed for before buying tires. Running a different size can change speedometer reading and load on the drivetrain.
A relocated front differential changes CV and driveline angles, so check these after installation. Vibration at higher four-wheel-drive speeds is a common sign that a driveline angle needs attention. Re-check the bolts on the brackets and skid plate after the first trail outings, since shifting hardware can loosen over time.
- Verify wheel backspacing before buying tires
- Measure CV and driveline angles after installation
- Check skid plate bolts after rough trail use
- Plan for minor trimming at full lock
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK1100 |
| Lift height range | 6 to 7 inches |
| Upper spacer | Coilover spacer, lifts from the top of the shock |
| Brackets and skid plate | 1/4-inch steel |
| Tire options | 35/12.50R17 on 17×8, 325/65R18 on 18×9, 35/12.50R20 on 20×9; all with 5-inch backspacing and minor trimming |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits 2017 to 2018 Chevrolet Silverado 1500 models in the Custom, High Country, LS, LT, LTZ, SSV and WT versions, and 2014 and 2017 to 2018 GMC Sierra 1500 models in the Base, Denali, SLE and SLT versions.
The 2015 and 2016 model years do not fit this kit, and standard cab trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fabtech says OEM wheels and tires cannot be used with this kit, so the listed tire and wheel sizes apply. Because the front differential is relocated, the CV angles and driveline angles should be checked. A wheel alignment belongs after the install.
What’s included
The kit includes the upper coilover spacers, the relocated differential hardware, the 1/4-inch steel brackets and the skid plate.
Not included: Tires and wheels. Use the sizes this kit is designed for.









