Overview
The Fabtech K4108DL is a 3 inch Sport system with Dirt Logic 2.25 resi shocks for the 2018 Jeep Wrangler JL Unlimited four-door. It is made for 6 cylinder models.
The Sport system uses dual rate front and rear coil springs. The first stage is soft for extra travel, and the second stage handles payload and larger impacts at higher speeds.
Key features
- Dirt Logic 2.25 resi shocks, the remote reservoir version in this line
- Dual rate front and rear coil springs that are corner specific to the JL
- Four bump stop extensions that retain the stock down travel
- Extended front and rear sway bar links with urethane bushings
- Heavy duty rear track bar bracket that re-centers the axle
- Retains the factory roll center at the higher ride height
Checking fender clearance
Fender clearance decides how much room a larger tire has when the suspension compresses or the steering turns. Standard fenders and high clearance fenders give different amounts of room, and trimming or cutting may be needed depending on the tire chosen. Planning clearance before buying tires saves time and prevents damage to the body and wiring.
With a Sport system, the dual rate coils keep the vehicle level, but tires can still rub on the inner fender at full lock or over bumps. Check clearance at full steering in both directions and with the suspension compressed. Look for rub marks on the tire sidewalls after the first trail trip. Recheck the bump stops and the rear track bar bracket once the new height is set, since these help keep the axle in position.
- Measure clearance at full lock
- Check for rub marks after trail use
- Confirm the engine before ordering
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K4108DL |
| UPC | 700008587591 |
| Lift | 3 inch Sport system, 2.5 to 3 inch range |
| Suspension type | Coil spring kit |
| Front shocks | Dirt Logic 2.25 resi |
| Engine | 6 cylinder models only |
| Included | Front and rear dual rate coil springs, front and rear sway bar links, front and rear bump stop extensions, rear track bar bracket |
The dual rate coils keep the vehicle level from side to side. The rear track bar bracket re-centers the axle, and the factory roll center stays in place at the higher ride height.
Vehicle fitment
The fitment covers the 2018 Jeep Wrangler JL Unlimited four-door models across the covered trim levels. It fits 6 cylinder models only, so confirm the engine before ordering.
Confirm your vehicle’s year, model, trim and engine before ordering.
Installation notes
Standard fenders need minor trimming for larger tires, and high clearance fenders need cutting for the largest ones. Plan an alignment after the new height is set.
What’s included
Included: front and rear dual rate coil springs, front and rear sway bar links, front and rear bump stop extensions and the rear track bar bracket. The Dirt Logic 2.25 resi shocks are part of the kit.









