Overview
The Fabtech K2070 is a 3-inch spindle lift for the 1997–2003 Ford F-150, the 2004 Ford F-150 Heritage and the 1999–2003 Ford F-150 Lightning. The front lift comes from CNC machined spindles, and lift blocks with U-bolts lift the rear.
The kit clears 295/75R16 tires on 16×8 wheels with a 4 5/8-inch backspace. It includes an alignment cam and bolt kit, plus twin tube performance shocks at the front and rear. Shock boots are not included.
Key features
- 3-inch lift, range 3 to 4.99 inches
- CNC machined spindles
- Alignment cam and bolt kit
- Front and rear twin tube performance shocks
- Clearance for 295/75R16 tires on 16×8 wheels
- Blocks and U-bolts at the rear
Things to check
Spindle lifts change the front steering and suspension geometry, so the ball joints, wheel bearings and tie rod ends should be inspected when the kit goes in. Worn parts that were fine on stock components can show play once the spindles move the wheel position. Replacing worn steering parts at the same time avoids repeat work.
The alignment cam and bolt kit give a way to set front alignment after the spindles are fitted. Recheck the setting after the first few drives, because new parts settle. Shock boots are not included, so plan to source them if they are needed for the front shocks. Larger tires also change the wheel well clearance and should be checked before the first trail run.
- Inspect ball joints and wheel bearings during install
- Set alignment with the cam after spindles are fitted
- Check steering stops for clearance at full lock
- Source shock boots separately if needed
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2070 |
| UPC | 70000583835 |
| Lift height | 3 inches (range 3 to 4.99 inches) |
| Suspension type | Knuckle |
| Front lift | CNC machined spindles |
| Rear lift method | Lift blocks and U-bolts |
| Tire and wheel fit | 295/75R16 on 16×8 with 4 5/8-inch backspace |
| Shocks | Front and rear twin tube performance shocks |
| Shock boots | Not included |
Vehicle fitment
It fits the 1997–2003 Ford F-150, the 2004 Ford F-150 Heritage with the SVT Lightning name, and the 1999–2003 Ford F-150 Lightning.
The list does not cover F-150 models from 2004 onward, other than the Heritage listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fabtech includes an alignment cam and bolt kit, so an alignment check should be part of the job after the spindles are fitted. The shock boots are not included, so they must be sourced separately if needed.
What’s included
CNC machined spindles, blocks with U-bolts, an alignment cam, a bolt kit and front and rear twin tube performance shocks.
Not included: Shock boots.









