Overview
The Fabtech K2246DL is a 2-inch Uniball control arm lift system that uses Dirt Logic 2.5 Resi coilovers at the front. It includes Uniball upper control arms and DLSS shocks.
Confirm fit for your own year, model and trim before ordering.
Fit depends on the vehicle, so match the kit to your year, model and trim before ordering.
Key features
- 2-inch lift through a Uniball control arm system
- Uniball upper control arms included
- DLSS shocks
- Front Dirt Logic 2.5 Resi coilovers
Control arm lift basics
Control arm lift systems raise the front by changing the geometry of the upper control arms rather than adding spacers. Replacing the upper arms alters caster and camber settings, so a full alignment is important after installation. Coilovers and shocks are often replaced at the same time to keep the front ride consistent.
Uniball joints take the place of stock bushings, which can reduce flex and make the front end feel more direct on the road. Stiffer joints can transmit more noise and vibration, so check them for play at regular intervals. Coilovers with a reservoir need periodic checks for leaks and mounting wear.
- Get a full alignment after installation
- Inspect the Uniball joints for play during service
- Check coilover mounts and reservoir hoses for leaks
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2246DL |
| UPC | 70000831744 |
| Lift height | 2 inch |
| Upper control arms | Uniball |
| Front shocks | Dirt Logic 2.5 Resi coilovers |
| Rear shocks | DLSS shocks |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, then check the kit contents against your installation.
Installation notes
Control arm replacement changes the alignment geometry, so have the alignment checked once the kit is installed.
What’s included
The kit includes Uniball upper control arms, DLSS shocks and front Dirt Logic 2.5 Resi coilovers. Check the package contents against your installation before starting.









