Overview
The Fabtech K1081 is a 4-inch budget lift for the 2015–2017 Chevrolet Suburban, the 2015–2018 Chevrolet Tahoe, the 2015 GMC Yukon and the 2015–2018 GMC Yukon XL. It gives a mild lift height, a supple ride and clearance for 33-inch tall tires.
The kit includes replacement DOM upper tubular control arms with heavy duty extended range ball joints. On 4WD models the front differential housing is relocated to keep proper CV angles at the new ride height, and a 1/4-inch thick steel skid plate protects the front differential. It works with both MagnaRide and non-MagnaRide vehicles. The rear uses spacers and keeps the stock rear shocks.
Key features
- 4-inch lift height, range 3 to 4.99 inches
- Replacement DOM upper tubular control arms
- Heavy duty extended range ball joints
- Front differential relocated on 4WD models
- 1/4-inch thick steel skid plate
- Works with MagnaRide and non-MagnaRide vehicles
Before you buy
Budget lift kits trade some ride control for a lower price and simpler parts. Replacement control arms and spacers change the front suspension angles, so the steering and driveline should be checked after installation. Upper control arms that replace the stock units often matter most in a lift like this, because they set how the front wheels travel.
Stock shocks stay in place with a kit that retains them, so their age matters. Worn shocks can make the new ride height feel loose or bouncy. Inspecting the shock mounts and bushings before installation is a good habit, and replacing them while the suspension is apart can save labor later.
Tires are a common concern with any lift. Test clearance at full lock and through suspension travel before going off road. Keep the spare tire, its carrier and any fender liners in mind, since they can contact the new tire height.
- Recheck torque on new fasteners after the first drives
- Set alignment after the new arms are in
- Inspect brake lines for stretch at the new angles
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1081 |
| UPC | 700007027701 |
| Lift height | 4 inches (range 3 to 4.99 inches) |
| Suspension type | Spacer |
| Rear lift method | Spacers, stock rear shocks retained |
| Tire and wheel fit | 295/70R17 on 17×8, 275/65R18 on 18×8, 285/55R20 on 20×9; minor trimming |
| Shocks | Not included |
| Included parts | Upper control arms, skid plate, spacers and all required hardware |
Vehicle fitment
It fits the 2015–2017 Chevrolet Suburban, the 2015–2018 Chevrolet Tahoe, the 2015 GMC Yukon and the 2015–2018 GMC Yukon XL.
It does not fit 2WD Suburban or 2WD Yukon XL models, or all-wheel drive models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check the ride height once the kit is installed, since some models may not sit level afterward. The OEM wheel and tire cannot be used with this kit.
What’s included
Replacement DOM upper control arms with ball joints, the front skid plate, the spacers and all required hardware.
Not included: Shocks.









