Overview
The Fabtech K7012M is a basic adjustable coilover lift kit with rear Stealth shocks for the 2005–2007 Toyota Tacoma. It gives a 2.5 to 3.5 inch lift and suits both highway and off-road driving.
The front uses a replacement coil spring and an adjustable coil seat, so the coilovers can be set within the lift range. The rear uses Stealth shock absorbers. The kit comes with coils and all required hardware.
Key features
- Adjustable coilover system at the front with a replacement coil spring and adjustable coil seat
- Stealth monotube shock absorbers at the rear
- Lift height range of 2.5 to 3.5 inches
- Coils and all required hardware included
- Tire guidance: 285/75R16 on 16×8 wheels with a 4 5/8 inch backspace, with minor trimming
Coilover setup and alignment
A coilover front end gives you a way to set ride height without swapping springs, but the adjustable coil seat has to be set evenly on both sides. Uneven settings can pull the truck to one side and wear the tires unevenly. After any height change, measure both sides and recheck the alignment, since camber and caster shift as the front rises.
Rear Stealth shocks should be matched to the front height so the truck does not sit tilted. On Tacomas used for towing or loaded trips, the rear springs and bushings take more stress, so inspect them more often. Look for oil on the shock bodies, worn bushings, and clicking or squeaking over bumps.
Tire choice matters too. Tire and wheel fit is tightly limited for this kit, so any upgrade should be checked against wheel backspace before buying.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K7012M |
| UPC | 700007234541 |
| Kit type | Basic adjustable coilover lift kit |
| Position | Front |
| Lift height range | 2.5 to 3.5 inches |
| Shocks | Stealth monotube shocks at the rear, included |
| Tire guidance | 285/75R16 on 16×8 wheels, 4 5/8 inch backspace, minor trimming |
Vehicle fitment
It fits the 2005–2007 Toyota Tacoma.
Tacoma model years outside 2005–2007 are not covered. Verify your year and model match the years covered before buying.
Installation notes
Larger tires cannot be installed on the OEM wheels, so 16×8 wheels with a 4 5/8 inch backspace are needed for this kit. Minor trimming is needed to fit the 285/75R16 tire. Have the alignment checked after installation, since lift kits change suspension geometry.
What’s included
The kit includes coils, rear Stealth shocks and all required hardware.
Not included: Tires and wheels, which must meet the sizing above.









