Overview
The Fabtech K2072DL is a 6-inch front coilover conversion for the 2008–2010 Ford F-250 Super Duty and the 2008–2010 Ford F-350 Super Duty. It replaces the stock coil spring buckets with gusseted 1 3/4-inch tubing, and it is built to take Dirt Logic 4.0 coilover shocks. Dirt Logic SS shocks are included.
This conversion is compatible with radius arm and 4-link systems, and it does not work with leveling or basic systems. Hydraulic bump stops can complete the setup, but they are an optional add-on and are not part of this kit. The rear is lifted with lift blocks and U-bolts.
Key features
- 6-inch lift, range 5 to 6.99 inches
- Coilover conversion for Dirt Logic 4.0 shocks
- Gusseted 1 3/4-inch tubing
- Replaces the stock coil spring buckets
- Compatible with radius arm and 4-link systems
- Dirt Logic SS shocks included
Before you install
A coilover conversion moves the front spring to a coilover shock, so the shock length and mounting points set how the front suspension rides. Changing the spring seat also changes the load the frame mounts see, which is why the conversion is paired with a radius arm or 4-link system rather than a basic setup. Check the existing front control arms and the brake lines before starting, since the new mounts can change clearance.
After the front is changed, caster and camber should be checked with an alignment. Shocks and bump stops work together, so a bump stop is worth considering if the front tends to bottom out on rough trails. Keep the frame and crossmember welds and fasteners checked after the first few drives, as the coilover mounts carry the spring load.
Signs that a front coilover setup needs attention include uneven tire wear, a loose or knocking front end and shocks that leak fluid. Inspect the coilover hoops and lower mounts at each service and replace worn bushings or fasteners before they affect steering feel.
- Check brake lines and clearance after the front change
- Re-check alignment once the conversion is installed
- Inspect shock seals and mounts for leaks or play
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2072DL |
| UPC | 674866096608 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Coilover conversion |
| Conversion tubing | Gusseted 1 3/4-inch tubing |
| Rear lift method | Lift blocks and U-bolts |
| Shocks | Dirt Logic SS shocks included |
| Compatibility | Radius arm and 4-link systems; not leveling or basic systems |
Vehicle fitment
It fits the 2008–2010 Ford F-250 Super Duty and the 2008–2010 Ford F-350 Super Duty.
Fit covers Super Duty trucks from those years only. Confirm fit for your vehicle’s year, model and trim before ordering, including whether it is a dually.
Installation notes
The coilover conversion replaces the stock coil spring buckets, so the front is changed at the spring seat. It will not work with leveling or basic systems, and it should be used with a radius arm or 4-link system.
What’s included
Coilover conversion hoops, lower mounts, the gusseted 1 3/4-inch tubing, the Dirt Logic SS 4.0 coilover shocks and all required hardware.
Not included: The hydraulic bump stops, which Fabtech offers as an option.









