Overview
The Daystar 40 inch Jeep Renegade LED light bar kit, part KJ81000BK in black, is a roof-mounted light bar system for the Jeep Renegade with factory roof rack. The kit includes a 40 inch KC LED light bar and a Jeep Renegade roof mounting system. It bolts 100% to the factory rack rails.
The light bar uses a Combo Beam pattern with both spot and spread reflectors. It is made in the USA and carries a limited lifetime warranty. It fits 2015-2017 Jeep Renegade models with a factory roof rack.
Key features
- Mounts into the factory roof rack rails
- Combo Beam pattern with spot and spread reflectors
- 40 inch LED light bar with clear lens
- All necessary hardware and instructions included
- Black powder coat finish
- Made in the U.S.A., with a limited lifetime warranty stated by Daystar
Wiring and switching a roof bar
A roof-mounted bar sits higher than most auxiliary lights, so its beam reaches further over trails and into the trees. The Combo Beam pattern adds a focused center beam with a wider spread at the sides, which suits both trail speeds and slower technical sections. Because the bar is fixed to the rack rails, the rail hardware carries the load and should be checked regularly.
Wiring is the part most buyers underestimate. Run power from the battery through a fuse, then through a switch or relay that you can reach from the driver seat. A relay keeps the switch light and reduces the load on the switch contacts, which is useful for a bar of this size. Keep the wire clear of moving parts and the rack edges, and route it along the roof structure with clamps.
Roof bars also add wind noise and a little height. Check that the bar is secure after rough trail runs and before highway trips, and retighten the bracket fasteners if anything has loosened.
- Confirm the rack rails are sound before mounting
- Keep the switch within easy reach
- Recheck bracket fasteners after rough trails
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ81000BK |
| UPC | 618089005580 |
| Size | 40 inch |
| Bulb type | LED |
| Lens color | Clear |
| Beam pattern | Combo (spot and spread reflectors) |
| Type | Light bar with bracket mount |
| Sold as | Single |
| Finish | Black powder coat |
| Origin | Made in the U.S.A. |
| Warranty | Limited lifetime warranty. |
Vehicle fitment
It fits the 2015-2017 Jeep Renegade in the Latitude, Limited, Sport, Trailhawk, 75th Anniversary and Dawn Of Justice trims. The 2018 and later Renegade and other Jeep models are not covered by this kit. Make sure the year, model and trim match your vehicle before ordering.
Installation notes
The kit bolts directly to the factory roof rack rails and comes with all necessary hardware and instructions. Wire the bar through a fuse and a switch or relay, and check local road-use rules for auxiliary lights before mounting it on your Renegade.
What’s included
Daystar says all necessary hardware and instructions are included, along with the 40 inch light bar and the Renegade roof mounting system. The kit is sold as a single unit.
Not included: Check the package contents against your installation before starting, since a wiring harness and switch are needed to power the bar.














