Overview
The Radiance Plus 54-inch light bar in green, part number 36003 from Rigid Industries, is an LED light bar with Broad Spot optics. It is universal fit, so no year, make or model applies. The Radiance Plus bars put out up to 35% more raw lumens than before.
The bar uses the high-grade aluminum alloy housing of the E-Series and has a black exposed circuit board. Built-in back-lighting comes in white, amber, red, blue and green, and large back-lit, recently updated RIGID branding plates add to its look. Plan the mounting hardware separately, since the mount type is not fixed for this model.
Key features
- Up to 35% more raw lumens than before
- Broad Spot optics combining spot and flood patterns
- Built-in back-lighting in white, amber, red, blue and green
- Large back-lit, recently updated branding plates
- Black exposed circuit board
- Wiring harness and multi-trigger switch for hookup
Planning a 54 inch install
A 54-inch bar is long enough to need support at more than one point, so plan the mounting span before drilling. Long bars flex more under load and at speed, and a bracket that holds a short light can let a long one twist. Measure the clear space on the roof, bumper or grille, and confirm the bar will clear the hood, doors and any rack mounted behind it.
Wiring a bar this size means keeping power runs short and fused, with the switch within reach of the driver. Route cables through grommets, away from moving parts, and avoid the exhaust. Once installed, check the bolts and brackets after the first rough trail outing, and inspect the lens for cracks or water inside the housing, which signals a seal problem.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 36003 |
| UPC | 849774031052 |
| Product line | Radiance Plus |
| Length | 54-inch |
| Color | Green |
| Light source | LED |
| Optics | Broad Spot |
| Housing | High-grade aluminum alloy |
| Output | Up to 35% more raw lumens than before |
| Back-lighting colors | White, amber, red, blue, green |
| Included items | Wiring harness and multi-trigger switch |
Vehicle fitment
Universal fit is listed, so no specific year, make or model applies. The bar is not tied to a vehicle, and mount placement is up to the installer.
Check the mount area for a 54-inch bar before wiring. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The wiring harness and multi-trigger switch are included to simplify hookup. Fuse the power, route wires clear of moving parts and review local rules for auxiliary lights before road use.
What’s included
The bar includes a wiring harness and a multi-trigger switch.
Not included: mounting hardware, which should be planned separately









