Overview
The Daystar PA123 is a 3 inch body lift kit that raises the vehicle body off the frame to add tire clearance. It includes a steering extension, front bumper brackets, radiator fan shroud spacers, a fuel filler extension, blocks and all required hardware.
Check fit against your vehicle’s year, model and trim before ordering.
Key features
- 3 in. body lift height
- Front bumper brackets included
- Radiator fan shroud spacers and a fuel filler extension
- Blocks and all required hardware
Fuel and cooling after a lift
Raising the body changes where the fuel filler neck, the fan shroud and the radiator sit relative to the rest of the vehicle. Check that the filler hose has no tight bends and that the vent line can route without kinking. A fan shroud that sits too close to the fan blades can cause noise or contact, so measure clearance by turning the engine by hand after the spacers are fitted.
Cooling systems work best when the airflow path stays unobstructed, so inspect the radiator, shroud and fan clutch after the lift. Replacing a worn fan clutch or hose at the same time keeps the cooling side reliable. Check the body mounts after the first few trips, and watch temperature gauge readings during warm weather driving.
Specifications
| Brand | Daystar |
|---|---|
| Part number | PA123 |
| UPC | 618089005696 |
| Lift height | 3 in. |
| Included | Steering extension, front bumper brackets, radiator fan shroud spacers, fuel filler extension, blocks, all required hardware |
Vehicle fitment
Fit depends on your vehicle, so check it against the year, model and trim before ordering.
Body lift spacers and brackets are placed for specific models, so a kit for one vehicle may not line up on another. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit includes a fuel filler extension and radiator fan shroud spacers, check fuel filler hose and cooling fan clearance after the lift is in. A slow road test is a good first check after installation.
What’s included
Steering extension, front bumper brackets, radiator fan shroud spacers, fuel filler extension, blocks and all required hardware.
Not included: rear bumper brackets, since the kit has front bumper brackets only.









