Overview
The 660276-1 is a GM 8.5 inch 10 bolt front driver side inner axle shaft, 35.500 inches long with 28 splines. It is an original-equipment style replacement for the factory shaft and is for use with the 5-760X u-bolt.
Dana Spicer says micro-alloy material improves strength and a statistically controlled heat treatment ensures proper hardness. At 35.500 inches it is much longer than the passenger side inner shaft.
Key features
- Front driver side inner axle shaft
- GM 8.5 inch 10 bolt front axle
- 28 splines
- 35.500 inches overall length
- For use with the 5-760X u-bolt
- Micro-alloy material.
- Controlled heat treatment.
Driver side shaft service tips
The driver side inner shaft carries drive torque from the side gear to the front hub, so its wear shows up as clunking on acceleration or a vibration that changes with speed. Because the shaft is longer than the passenger side piece, mixing them up is a real risk, and the side must be confirmed before ordering.
When the shaft is out, check the seal, the spline ends and the bearing surfaces. Replace any part that shows play or grooving. Clean the axle housing thoroughly before the new shaft goes in, and recheck the joint for smooth movement after the first drives.
- Confirm the driver side before ordering
- Check the spline ends for wear
- Inspect the seal and bearing surfaces
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 660276-1 |
| Axle manufacturer | GM |
| Axle position | Front |
| Shaft location | Driver Side Inner |
| Axle type | GM 10 Bolt 8.5 Inches |
| Position | Front Left Inner |
| Spline count | 28 Splines |
| Overall length | 35.500 inches |
| Material | Micro-alloy |
| For use with | 5-760X u-bolt |
| Applications noted | 79-87 GM K10/K20 trucks, 79-87 GM K5 Blazer |
Vehicle fitment
Trim levels are shown with each vehicle below.
- 1987–1991 Chevrolet Blazer (Custom Deluxe, Scottsdale, Silverado)
- 1984–1986 Chevrolet K10 (Custom, Scottsdale, Silverado)
- 1984–1986 Chevrolet K10 Suburban (Custom, Scottsdale, Silverado)
- 1984–1986 Chevrolet K20 (Custom, Scottsdale, Silverado)
- 1984–1986 Chevrolet K20 Suburban (Custom, Scottsdale, Silverado)
- 1984–1986 Chevrolet K30 (Custom, Scottsdale, Silverado)
- 1984–1986 Chevrolet K5 Blazer (Custom, Scottsdale, Silverado)
- 1987 Chevrolet V10 (Custom Deluxe, Scottsdale, Silverado)
- 1987–1988 Chevrolet V10 Suburban (Custom Deluxe, Scottsdale, Silverado)
- 1989–1991 Chevrolet V1500 Suburban (Scottsdale, Silverado)
- 1987 Chevrolet V20 (Custom Deluxe, Scottsdale, Silverado)
- 1987–1988 Chevrolet V20 Suburban (Custom Deluxe, Scottsdale, Silverado)
- 1989–1991 Chevrolet V2500 Suburban (Scottsdale, Silverado)
- 1987–1988 Chevrolet V30 (Cheyenne, Custom Deluxe, Scottsdale, Silverado)
- 1989–1991 Chevrolet V3500 (Cheyenne, Scottsdale, Silverado)
- 1984–1991 GMC Jimmy (Base, High Sierra, Sierra Classic)
- 1984–1986 GMC K1500 (Base, High Sierra, Sierra Classic)
- 1984–1986 GMC K1500 Suburban (Base, High Sierra, Sierra Classic)
- 1984–1986 GMC K2500 (Base, High Sierra, Sierra Classic)
- 1984–1986 GMC K2500 Suburban (Base, High Sierra, Sierra Classic)
- 1984–1986 GMC K3500 (Base, High Sierra, Sierra Classic)
- 1987–1991 GMC V1500 Suburban (Base, High Sierra, SLE, Sierra Classic)
- 1987 GMC V2500 (Base, High Sierra, Sierra Classic)
- 1987–1991 GMC V2500 Suburban (Base, High Sierra, SLE, Sierra Classic)
- 1987–1991 GMC V3500 (Base, High Sierra, SLE, Sierra Classic)
Only the vehicles and years above are covered. Other GM trucks and other axle sizes need different shafts. Confirm your vehicle’s year, model and trim before ordering.






