Overview
The Dana Spicer Dana 44 Replacement Front Outer Axle Shaft, part 620200, is an outer stub axle shaft for the Dana 44 front axle. Dana Spicer describes its replacement shafts as OE-style parts for popular factory applications.
No vehicle is named for this shaft, so match the axle type and spline count to your axle before ordering.
Key features
- OE-style replacement
- Outer stub shaft position
- 19 spline
- Dana 44 front axle
Outer shaft wear signs
Outer stub shafts take the drive torque from the hub through the wheel end, so they see the highest stress at the splined connection. Wear often shows as rounded splines, a loose fit in the hub, or grease leaking from the outer seal. Before fitting a new outer shaft, clean the splines and the hub bore so the parts seat fully.
Outer shafts are usually replaced with a new hub seal, bearing and sometimes the axle nut. Check the bearing for roughness and the seal surfaces for grooves. When the axle is opened, inspect the inner side too, since the two shafts share the drive load through the differential.
- Check spline wear at the hub
- Replace the hub seal during install
- Clean the hub bore before fitting
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 620200 |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft location | Outer stub |
| Axle spline | 19 |
| Manufacturer | Dana |
Vehicle fitment
This shaft is sized to the axle rather than a vehicle. Fit depends on axle type and spline count, so check both against your front axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One outer axle shaft.







