Overview
The Dana Spicer Dana 44 Replacement Front Axle, part 72112-1X, is an OE-style front axle shaft for the passenger side inner position. It has 30 splines and is made for the Dana 44 front axle.
Dana Spicer makes these replacement shafts for popular factory applications, and they are built to the same type as factory shafts. Confirm the Dana 44 axle type and the 30 spline count against your front axle before ordering.
Key features
- OE-style replacement shaft
- Passenger side inner position
- 30 spline
- Dana 44 front axle type
Removing and checking the shaft
Inner axle shafts sit inside the differential and are usually held by a retainer or a bolted flange at the carrier side. Before pulling the old shaft, drain fluid as needed, mark the position, and note how the seal and retainer are arranged so the new part goes back in the same way.
Inspect the seal area and bearing journal for wear, grooves or leaks once the old shaft is out. Replacement seals are often worth fitting when the axle is open, and the carrier side of the shaft should be clean before the new part slides in. Torque the retaining hardware to the value for your axle, and check fluid level after the first drive. Keep the old and new parts labeled so the position is clear.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 72112-1X |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft location | Passenger side inner |
| Axle spline | 30 |
| Manufacturer | Dana |
Vehicle fitment
Universal fit is shown, but an axle shaft is sized to the axle. Match the Dana 44 type and the 30 spline count to your front axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Inner shafts are removed from the differential side, so confirm the removal method for your axle before starting the job.
What’s included
One passenger side inner axle shaft. The quantity is one per part number.







