Overview
The Dana Spicer U-joint 5-165X, part number D/S5-165X, is a universal joint for driveshafts. Dana Spicer has made U-joints for well over 50 years and has supplied heavy duty and light duty truck builders.
The joint is made from premium materials and machined to quality standards. No vehicle or dimension is attached, so confirm the size against your driveshaft before fitting.
Key features
- Made by Dana Spicer, with well over 50 years of U-joint production.
- Dana Spicer describes premium materials used in production
- Machined to quality standards during production.
- Built for heavy duty and light duty truck driveshafts.
Choosing a replacement joint
Before choosing a replacement U-joint, measure the cap diameter, the cross width and the yoke style on the joint you are replacing. Strap style and bolt-in style yokes are not interchangeable, so the joint must match the yoke design on the driveshaft. A joint that is slightly off can fit by hand but bind under load.
Replacement joints often come with new caps and a grease fitting, so check whether the kit includes the parts you need. Inspect the yokes for wear or cracks, since a worn yoke can ruin a new joint quickly. A driveshaft that vibrates after replacement should be balanced and checked for phasing.
- Cap diameter and cross width
- Yoke style match
- Yoke wear and cracks
- Driveshaft balance after install
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S5-165X |
| Type | Universal joint for driveshafts |
Vehicle fitment
This joint has only a Universal Fit tag, with no vehicle named. Match its size to your driveshaft before fitting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One universal joint is included, with no extra parts.









