Overview
The Dana Spicer 5-1503X is a U-joint with a forged cross, a lubeable bearing design and an outside snap ring. It is positioned at the front driveshaft at the front axle, and it is a direct fit for a range of compact trucks, SUVs and Japanese imports.
Dana Spicer says its U-joints are interchangeable with existing parts, so the joint can replace the original without a change in part number. The company credits a computer-designed bearing plate and a patented manufacturing process that controls tolerances closely. Those claims describe how the company makes its joints; they are not measured against any other product.
The bearing cap diameter is 0.984 inches and the snap ring diameter is 2.517 inches. These are the measurements to match before ordering, since the list covers many different axle and driveshaft combinations.
Key features
- Forged cross
- Lubeable bearing design
- Outside snap ring
- Front driveshaft at the front axle position
- Interchangeable with existing parts.
Greasing and inspecting a U-joint
A U-joint lets the driveshaft change angle as the suspension moves, and its bearings wear over time. Early signs include a light clunk when shifting, a squeak or grind at low speed, and vibration that grows with road speed. Check for play by holding the yoke and driveshaft and moving them by hand.
A lubeable joint should be greased until fresh grease shows at the seals, which helps keep dirt and water out of the bearing cups. When one joint is replaced, check the other joints on the driveshaft because they wear at similar rates. Make sure both snap rings seat fully in their grooves before installing.
- Check for play at the yoke by hand
- Grease until fresh grease shows at the seals
- Confirm both snap rings seat in their grooves
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | D/S5-1503X |
| Cross | Forged |
| Lubrication | Lubeable |
| Snap ring | Outside |
| Bearing cap diameter | 0.984 inches |
| Snap ring diameter | 2.517 inches |
| Position | Front driveshaft at front axle |
| Fitment type | Direct fit |
Vehicle fitment
It fits the Chevrolet Tracker and Geo Tracker, the Dodge D50, Ram 50 and Raider, the Mitsubishi Mighty Max, Montero and Montero Sport, the Suzuki Samurai, Sidekick, Vitara, Grand Vitara, X-90 and XL-7, and the Plymouth Arrow pickup.
The list covers many makes and model years, so match the make, model, year and driveshaft position of your vehicle before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The U-joint with its outside snap ring.









