Overview
The Dana Spicer 75594X is a driver side front inner axle shaft for Dana 60 front axles, with 30 splines. Dana Spicer presents it as an O.E. style replacement for most popular applications.
Use the driver side position, the Dana 60 axle type and the 30 spline count to match it to your current shaft. No vehicle years or models are named.
Key features
- Driver side inner position
- 30 spline count
- O.E. style replacement
- Dana 60 front axle type
Matching a Dana 60 inner shaft
A driver side inner shaft transfers torque from the differential to the front hub, so wear at the splines and seal matters for both drive and steering. Vibration, clicking on tight turns and fluid at the seal are typical signs that the shaft needs attention. Inspect the differential end and the hub end when the axle is opened.
Before installing a replacement, check the seal bore for scoring, look at the differential side gear, and confirm the bearing is smooth. Matching the side, axle type and spline count to the old shaft prevents fitment problems on the bench and in the vehicle. A clean, well-lubricated assembly helps the new shaft last.
- Confirm the side and spline count
- Check the seal bore for scoring
- Inspect the bearing for roughness
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 75594X |
| Axle type | Dana 60 |
| Axle location | Front |
| Shaft location | Driver side inner |
| Axle spline | 30 splines |
| Popular axle manufacturer | Dana |
Vehicle fitment
This driver side inner shaft suits most popular Dana 60 front axle setups. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The driver side inner shaft is the only component supplied. Hardware, seals and bearings are not part of the package.








